1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius 2010 JBL (NON-NAV) to (JBL-NAV) Upgrade Process

Discussion in 'Gen 3 Prius Audio and Electronics' started by iceman, Feb 14, 2014.

  1. iceman

    iceman Junior Member

    Joined:
    Dec 25, 2010
    6
    0
    0
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    Four
    Hey Prius Chat Peeps -

    I recently bought a Toyota Prius 2010 IV with JBL sound system and voice command (Non Nav). I liked it a lot however I liked the Prius that have the stock OEM nav screen better.

    Now I know that the actual nav on it is kinda worthless and your Google Maps on your smartphone is a hell of a lot better. But I wanted the look of it and the bluetooth streaming.

    Now I also know that you can simply by a bluetooth streaming dongle that plugs into in your aux port but I also wanted bluetooth info showing up on a screen.

    I also liked the idea of a backup camera (which my current Prius doesn't have - since... no nav screen).

    So my goal was to install a JBL nav upgrade to my Prius IV with JBL sound system and voice command.

    Here is my process and parts so far.
    1. The JBL Nav Unit ($600-$900 on eBay)
      This unit can be bought via eBay for $725. It's a easy install and uses the mounting brackets. The wiring harness (cables that plug into the back) is slightly different and have a couple of questions for you guys down below.

    2. The USB/AUX Connector Kit ($130-$160 on eBay - OPTIONAL)This connector kit replaces your old simple AUX connector in your center arm-rest console. It also has a different junction box that has to be installed under the arm-rest console. This kit enables you to control your iPhone (in my case) from the nav unit itself through the USB connection. But this isn't very good manager of music as the scrolling process kinda sucks. I went ahead and bought the kit anyway for shits and giggles.

    3. The Backup Camera Aftermarket - non OEM ($20 on ebay)
      I bought a camera from ebay. From china but seems to be a good build with built in LEDs for extra light at night. I bought this becuase I had no luck finding the wiring harness from the OEM camera to the stock nav radio.

    4. Aftermarket adapter for head unit to connect adapter ($65.00)You will need this so you can use a non OEM camera.
    5. Nav Disc for the NAV unit ($150-200 on eBay)
      Without this your Nav unit won't do anything since there isn't any internal memory and it dependent completely on the disc.
    In theory that is all the parts you'll need ASSUMING you already have the JBL system installed. If you don't then you have a whole other mess on your hands and this upgrade seems way unreasonable. Since you'll have to buy the speakers, amp, and wiring harnesses for the JBL system which is super costly and honestly I've had both setups (JBL and non-JBL) and they are only a little better. PLUS the nav unit (I beleive) requires that you have a JBL system... I could be wrong.

    SO THIS IS WHERE I NEED YOUR HELP!

    For the life of me I am having trouble getting the plug (which went to the satellite from the old head unit) to work with the NAV unit. The size of the blue plug doesn't seem to match up with the blue female receiver on the NAV unit like it did on the non-nav JBL unit. Sooo... is there another wiring harness that I need or a special adaptor for conversion?

    Also... my voice command features on my steering wheel are not working either. Any ideas there?

    Thanks guys in advance!

    Ron
     
    #1 iceman, Feb 14, 2014
  2. iceman

    iceman Junior Member

    Joined:
    Dec 25, 2010
    6
    0
    0
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    Four
    I should also note that (next song / prev song buttons) on steering wheel works just fine... just not the voice command... and there is not phone book option on the Nav unit... I thought there was?
     
    #2 iceman, Feb 14, 2014
  3. iceman

    iceman Junior Member

    Joined:
    Dec 25, 2010
    6
    0
    0
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    Four
    ALSO!!
    If you want a kit of your own here is one I am selling:
    eBay Item: 201037849694

    [​IMG]

    Good luck!
     
    #3 iceman, Feb 16, 2014
  4. iceman

    iceman Junior Member

    Joined:
    Dec 25, 2010
    6
    0
    0
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    Four
    #4 iceman, Feb 21, 2014
  5. Jlouang

    Jlouang New Member

    Joined:
    Mar 26, 2014
    3
    0
    0
    Location:
    Nashville, Tennessee
    Vehicle:
    2010 Prius
    Model:
    III
    Any solution so far? I was thinking of doing the same upgrade on my buddy car.
     
    #5 Jlouang, Apr 8, 2014
  6. samtheman7

    samtheman7 Junior Member

    Joined:
    May 2, 2015
    18
    3
    6
    Location:
    irvine CA
    Vehicle:
    2012 Prius
    Model:
    Three
    any solution so far for the above problem?
    i've done the same step up and having same problems. I've added OEM navigation everythig work but my Bluetooth phone and my voice command features on my steering wheel are not working, however, all other buttons work just fine, even bluetooth Audio works.
     
    #6 samtheman7, Mar 27, 2018
  7. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,915
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Did you see from your research that the 2010 JBL nav system has the XM tuner as a separate box mounted under the driver's seat? An antenna cable extension runs down to it from the antenna cable end that you have, and high-speed AVC-LAN connects it back to the head unit.

    I didn't see the XM tuner listed in your bill of materials.

    -Chap
     
    #7 ChapmanF, Mar 27, 2018
  8. samtheman7

    samtheman7 Junior Member

    Joined:
    May 2, 2015
    18
    3
    6
    Location:
    irvine CA
    Vehicle:
    2012 Prius
    Model:
    Three
    thanks for the quick replay,

    I dont think my car has XM, I looked under the seat and there is no tuner box. and my old radio doesnt say XM on it just JBL. I attached pix of my old and new head units.

     
    #8 samtheman7, Mar 27, 2018
  9. samtheman7

    samtheman7 Junior Member

    Joined:
    May 2, 2015
    18
    3
    6
    Location:
    irvine CA
    Vehicle:
    2012 Prius
    Model:
    Three
    if you notice the phone icon is missing from the Nav head unit as it doesn't recognize it, the Bluetooth audio works but not the phone. and also the command button on the steering doesnt work either. the only plug that i didnt plug in is the blue one which I thought it's for XM antenna but again i don't think I have XM, so could it be the problem?
     
    #9 samtheman7, Mar 27, 2018
  10. samtheman7

    samtheman7 Junior Member

    Joined:
    May 2, 2015
    18
    3
    6
    Location:
    irvine CA
    Vehicle:
    2012 Prius
    Model:
    Three
    Hi Chap,

    so if I dont have XM tuner, I wont be able to get the bluetooth phone and microphone to work? or is there anyway around it?
     
    #10 samtheman7, Mar 28, 2018
  11. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,915
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I'm sorry, you know what, I think I was responding to the original post (not noticing it was four years old) , and not to your different issue. I'm not sure what to say there; I think the bluetooth should Just Work.

    I think it has to recognize that the microphone is connected. Have you checked that out through the diagnostic menu?

    -Chap
     
    #11 ChapmanF, Mar 28, 2018
  12. Ivo

    Ivo New Member

    Joined:
    Feb 6, 2019
    3
    0
    0
    Location:
    Maryland
    Vehicle:
    2010 Prius
    Model:
    II
    HI Samtheman,
    this is exactly what I am trying to do. I have the same stock crap base head unit as you. So, it looks like you just plugged all the existing connectors from the old unit into available spots on the nav unit, but it looks like there was nothing to plug in the 28 pin on the new Nav unit. I am wondering if this is the issue and some of the steering wheel controls are probably part of the 28 pin functionality. Were you ever able to get the phone and steering wheel controls working and how did you accomplish this? Did you add a GPS antenna in order to get the GPS working? What else was not working when you plugged the wires initially? Also, did you ever install a camera and where did you plug it in?
    Ivo
     
    #12 Ivo, Feb 7, 2019
  13. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One


    Would this swap work on the base model prius. I dont have the jbl radio. Just like yours but doesnt say jbl on it.
     
    #13 Apatel1101, Feb 19, 2019
  14. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,915
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    As long as you get the JBL amp also (goes under the passenger seat), refer to the wiring diagram and run the right wires to it, and from it to the speakers ... it'd be a bit of a project.
     
    #14 ChapmanF, Feb 19, 2019
  15. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    I dont really need jbl system. Would it work without it. I just want the backup camera.
     
    #15 Apatel1101, Feb 20, 2019
  16. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,915
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The headunit for the JBL system does not contain an amp, because it's intended to work with the JBL amp under the passenger seat. So if you don't also provide the amp, you won't hear much.
     
    #16 ChapmanF, Feb 20, 2019
  17. HM7

    HM7 New Member

    Joined:
    Nov 1, 2021
    2
    0
    0
    Location:
    Houston
    Vehicle:
    2010 Prius
    Model:
    Four
    Probably been a while. were you able to figure this one out? I did the same. Audio works but no phone or steering wheel buttons.
     
    #17 HM7, Nov 1, 2021
  18. Chris Hammond

    Chris Hammond New Member

    Joined:
    Apr 18, 2022
    5
    3
    0
    Location:
    Bloomington, Indiana
    Vehicle:
    2010 Prius
    Model:
    III
    Just tried the same thing on my 2010 with the same result. Anyone figure this out?
    Thanks,
    Chris
     
    #18 Chris Hammond, May 2, 2022
(You must log in or sign up to post here.)