Review: Revier JDM projector fog lamp with CCFL ring

xliderider · Feb 4, 2014

Mrjfunk said: ↑

I really dig this setup for making the corner and fog lights into DRL's! Just bought me a 2010 Prius IV and would like to change out those ugly plastic fog covers. I'm a newbie to custom light wiring but realize you probably had to purchase a DRL controller.

1. If so, which DRL controller do you recommend? No controller needed.
2. Did you have to wire both corner and fog lights in series? I've seen a YouTube video on how to wire the fog lights but uncertain of this setup. No, wiring in series will make the lights dimmer by reducing the current.
3. Does the unlit led lights on the corner blink when you set your turn signal like originally intended? Yes, they are connected to the oem factory turn signal harness connector.

Any information you have would be greatly appreciated. Thanks!
Click to expand...

See my responses embedded into your quote above.

And here is your answer from the man himself on where to get power for the DRLs (edited for your application):

32kcolors said: ↑

There's quite a few threads on modifying 2012+ stock DRLs if you'll do a search wiring DRLs. With aftermarket DRLs like Revier, easiest would be just to insert the wires into fuse #25 or 26. They'll be always on in ACC mode.
Click to expand...

Mrjfunk · Feb 6, 2014

Thanks guys for all the input. Now just need to find me a set of each!

Review: Revier JDM projector fog lamp with CCFL ring

xliderider Senior Member

Mrjfunk Junior Member

About PriusChat

Quick Navigation

Like us on Facebook

Buy us a beer!

Useful Searches

Review: Revier JDM projector fog lamp with CCFL ring

xliderider Senior Member

Mrjfunk Junior Member