1. Attachments are working again! Check out this thread for more details and to report any other bugs.

LED Strip Interior Lighting Addition

Discussion in 'Prius c Accessories and Modifications' started by Runswithdog, Jan 24, 2014.

  1. Runswithdog

    Runswithdog Junior Member

    Joined:
    Jan 23, 2014
    30
    20
    0
    Vehicle:
    2013 Prius c
    Model:
    Three
    I know many people have complained about the poor interior lighting in the Prius C. I felt the same when I bought mine a month ago. After reading some of the posts here, I went to buy some LED replacement lights for the existing fixtures, but two local auto parts stores were out of the ones to fit my car. But the second store, Pep Boys had a large supply of LED products and I walked out with a package of two LED strips in Bright White. They packages had a battery and a switch built-in so you could test the lights before you buy. They seemed plenty bright to light up our car. So I bought them. ;)

    Installing these lights were sooo easy. I would highly recommend them. They have 3M double sticky tape on the back of them with a wire coming out one end. They are designed for 12 volt car systems. So looking into my mounting options, I started with the rear hatch light. I supported one end under the trim for the middle seatbelt storage area and drilled a hole in my headliner the appropriate distance away. I made the hole oval shaped similar to the shape of the lighting strip and passed the wires through. I removed the backing off the double sticky tape and pushed the wire end of the LED strip into the hole and pressed the adhesive to the headliner. I popped out the trim pieces that were in the way leading to the hatch light and fed the wire though. I soldered these wires to the wires leading to the regular hatch light and put everything back together. Time spent was less than 30 minutes.

    The second strip LED light I decided to install mid-cab. I picked my location and drilled a second hole into the headliner. I removed the front light by pushing on the metal tabs holding the light figure in place. I removed the microphone for good measure too. I taped the wires to the end of a long stiff rod and passed them through the hole to the front with little difficulty. I used the adhesive to adhere the LED strip to the headliner with this LED only being supported by the hole on one end. (We will see how long it last.) Being a little indecisive on how I wanted to wire this light and thinking I may add a separate switch later. I decided not to do anything permanent and twist the wires around the strips of conductive metal on on regular light. I covered them with electrical tape. I chose to come off the drivers map light to allow the passenger to turn on his map light without disturbing the driver as much. I put everything back together and spent just over an hour total time.

    The results are amazing! This is the lighting Toyota should have had in the first place. IMG_5430.jpg IMG_5431.jpg IMG_5432.jpg IMG_5434.jpg IMG_5435.jpg IMG_5438.jpg IMG_5440.jpg IMG_5442.jpg IMG_5444.jpg IMG_5447.jpg IMG_5448.jpg
     
    #1 Runswithdog, Jan 24, 2014
    TheyCmeNow, genetiix, rcortespr and 2 others like this.
  2. B2FiNiTY

    B2FiNiTY Active Member

    Joined:
    Dec 17, 2012
    979
    227
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    looks very cool and most importantly bright!
     
    #2 B2FiNiTY, Jan 24, 2014
  3. rcortespr

    rcortespr Junior Member

    Joined:
    Dec 14, 2013
    52
    20
    15
    Location:
    Puerto Rico
    Vehicle:
    2016 Prius
    Model:
    Two
    It looks great!
     
    #3 rcortespr, Jan 24, 2014
  4. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    very nice!
     
    #4 kingnba6, Jan 24, 2014
  5. Mo G

    Mo G Member

    Joined:
    Feb 12, 2013
    317
    98
    0
    Location:
    Dallas,Tx
    Vehicle:
    2012 Prius c
    Model:
    Four
    Looks great.
     
    #5 Mo G, Jan 24, 2014
  6. Hyper_PriusC

    Hyper_PriusC Member

    Joined:
    Dec 1, 2012
    83
    55
    0
    Location:
    San Jose, CA
    Vehicle:
    2012 Prius c
    Model:
    Three
    nice job. did you use any resistors for the LEDs? or do they tap directly to the +/- wires from the front interior light?
     
    #6 Hyper_PriusC, Jan 24, 2014
  7. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One

    most if not all those type of led strips are 12v which means they will work by just connecting them to a 12v setup
     
    #7 kingnba6, Jan 24, 2014
  8. kenmce

    kenmce High Voltage Member

    Joined:
    May 4, 2004
    1,539
    513
    0
    Location:
    NY
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Nicely done. (y)

    /Thinks "how can I top this"... considers adjustable RGB LED strips.../
     
    #8 kenmce, Jan 24, 2014
    rcortespr likes this.
  9. Runswithdog

    Runswithdog Junior Member

    Joined:
    Jan 23, 2014
    30
    20
    0
    Vehicle:
    2013 Prius c
    Model:
    Three
    Hyper_PriusC: Yes indeed. These are designed for 12 volts and tap right into the existing wiring.

    Kenmce: They do have multiple colors and lights that change color with a remote. I just wanted something for lighting and choose bright white.
     
    #9 Runswithdog, Jan 25, 2014
  10. grizdogg

    grizdogg Junior Member

    Joined:
    Aug 26, 2013
    29
    5
    0
    Vehicle:
    2013 Prius c
    Model:
    Two
    They sell these lights in reels on Amazon and ebay. I have used them for many projects at home (under cabinet lighting, kids bedroom, etc.). They are bright and I have been considering adding them to my c2 for a while. Thanks for posting, it gave me some ideas.
     
    #10 grizdogg, Jan 25, 2014
  11. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    i also used the strips to place in the footwells. they are only in the front right now but ill be adding 2 to the rear row.
    excuse the mess

    [​IMG]
    [​IMG]
     
    #11 kingnba6, Jan 25, 2014
  12. grizdogg

    grizdogg Junior Member

    Joined:
    Aug 26, 2013
    29
    5
    0
    Vehicle:
    2013 Prius c
    Model:
    Two

    Kingnba6 - Are those white only or did you use RGB?

    I am thinking two separate setups. White to add to the poor interior lighting of the dome lights. And RGB in the footwells so I can set them based on mood.
     
    #12 grizdogg, Jan 26, 2014
  13. grizdogg

    grizdogg Junior Member

    Joined:
    Aug 26, 2013
    29
    5
    0
    Vehicle:
    2013 Prius c
    Model:
    Two

    Kingnba6 - Are those white only or did you use RGB?

    I am thinking two separate setups. White to add to the poor interior lighting of the dome lights. And RGB in the footwells so I can set them based on mood.
     
    #13 grizdogg, Jan 26, 2014
  14. col127

    col127 Member

    Joined:
    Apr 4, 2012
    345
    19
    0
    Location:
    Illinois
    Vehicle:
    2012 Prius c
    Model:
    Three
    this is fantastic! I've always hated how dark my car is...

    it sounds simple, but I have no experience doing this kind of stuff... :p did you have to remove the headliner altogether? i'd assume so since you had to fish the mid-cab light to the front light?

    when you said you had to "drill a hole" did you just leave the headerliner on and drill straight up ? :)

    since your tapping the existing lights, I assume it turns on/off with the rest of the dome lights?

    and how did your wiring work exactly ? (sorry, I don't really understand this)- you simply twisted the two wires to metal in the interior dome housing in the front?
     
    #14 col127, Jan 27, 2014
  15. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One

    they are just white lights. im not a fan of the "mood" lights. but that sure would be cool.
     
    #15 kingnba6, Jan 27, 2014
  16. Runswithdog

    Runswithdog Junior Member

    Joined:
    Jan 23, 2014
    30
    20
    0
    Vehicle:
    2013 Prius c
    Model:
    Three
    I left the headliner on. I just drilled into the headliner and fished the wire through with the metal rod shown. For the back I did pull down the corner of the headliner to help feed the wires. Yes. They come on and off with the existing lights. Yes for the front lights I did twist them around the metal in the light housing. I did this on a temporary note in case I wanted to change it. But it has been fine so far.
     
    #16 Runswithdog, Jan 27, 2014
    rcortespr likes this.
  17. bikeboy999

    bikeboy999 Junior Member

    Joined:
    Mar 10, 2008
    43
    3
    0
    Location:
    Ottawa, Ont.
    Vehicle:
    2015 Prius v wagon
    Model:
    Five
    I changed all the lights in my van to LED and it really brightened up all the lights. I would like to point out that when you park in sketchy places (any street at night). Someone pulling on door handles might light up inside so they can determine the risk/reward of breaking in. So turn off courtesy lights, I think that is what they are called.


    Brian
     
    #17 bikeboy999, Jan 30, 2014
  18. B2FiNiTY

    B2FiNiTY Active Member

    Joined:
    Dec 17, 2012
    979
    227
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    As far as I know, no cars will light up the inside (or outside) when the doors are locked and someone pulls on the door handle.
     
    #18 B2FiNiTY, Jan 30, 2014
  19. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    if somebody does pull the handle and the lights turn on, then that means that the car is unlocked lol
     
    #19 kingnba6, Jan 30, 2014
    ztanos likes this.
  20. col127

    col127 Member

    Joined:
    Apr 4, 2012
    345
    19
    0
    Location:
    Illinois
    Vehicle:
    2012 Prius c
    Model:
    Three

    Thanks for the tips. Is the headliner difficult to pull down? What do you need to do exactly?

    For the front - twisting the wires around the metal in the light housing - is that 'secure'? Any concerns with electricity things ? And out of curiosity, why does twisting it around metal make it work? I also assume there's no positive / negative ends?

    The backlight - you said you soldered the wires to the back one - is there another way to do that? I don't know how to solder wires :) Thanks!!
     
    #20 col127, Jan 30, 2014
(You must log in or sign up to post here.)