1. Attachments are working again! Check out this thread for more details and to report any other bugs.

What are the dimension of the shifter stalk on the "c"...?

Discussion in 'Prius c Accessories and Modifications' started by Mike500, Jan 7, 2014.

  1. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    A friend of mine likes the JDM Luxis LS137A shift knob that I modified for my Prius"v."

    The original LS137A is made only for the Gen III Prius and sat too high for the Prius"v."

    I centered it carefully onto a lathe chuck, drilled it down further into the aluminum and rethreaded the hole.

    Now, another friend in California wants one modified for his Prius"c." A don't have access to the "c," since I live on the opposite coast.

    He doesn't want a generic knob with a "plastic" insert adapter for the M8x1.25 thread. He wants a knob threaded to M8x1.25 with no adapters.


    I need to know the "length" of the threaded part on the end and the "width" of the smooth shaft under the threaded part.

    Thanks for all who help. My friend thanks you, too.
     

    Attached Files:

    #1 Mike500, Jan 7, 2014
  2. rcortespr

    rcortespr Junior Member

    Joined:
    Dec 14, 2013
    52
    20
    15
    Location:
    Puerto Rico
    Vehicle:
    2016 Prius
    Model:
    Two
    I stumbled on this while on ebay,

    It says the dimensions are M8x1.25. I am just reposting what I read on the ebay post, I have not measured it or otherwise verified this information.

    Good luck.
     
    #2 rcortespr, Jan 8, 2014
    Mike500 likes this.
  3. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    Thanks.....
     
    #3 Mike500, Jan 8, 2014
  4. TrafficMPG

    TrafficMPG Junior Member

    Joined:
    Dec 20, 2012
    21
    6
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
    It's a stepped taper stalk. It extends out about 120mm from the trim. The top 27mm is 7mm wide with 24mm tapped. Below that you have 20mm of 8mm shaft and then the rest is 9mm.
     
    #4 TrafficMPG, Jan 8, 2014
    Mike500 likes this.
  5. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    My friend and I thank you very much!
     
    #5 Mike500, Jan 8, 2014
    rcortespr likes this.
(You must log in or sign up to post here.)