1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Front Flashers broken?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Rayden King, Dec 30, 2013.

  1. Rayden King

    Rayden King New Member

    Joined:
    Nov 27, 2013
    6
    2
    0
    Location:
    Costa Mesa, California
    Vehicle:
    2010 Prius
    Model:
    IV
    Hey guys,

    I bought a car a month back and i just realized a few days ago my front emergency flashers/blinkers do not work. The rear flash fine. the blinker alert on the dash was flashing very fast so I assumed I needed a new fuse. I replaced the fuse today and still no luck. I ave a hard time believing maybe both of the front blinkers just burnt out at the same time? Any suggestions?

    I should also add, its a 2010 prius IV
     
    #1 Rayden King, Dec 30, 2013
  2. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    If the indicator is hyper-flashing than it is one or both of the bulbs. Not the easiest things to replace. You have to go from underneath.
     
    #2 spiderman, Dec 30, 2013
    Rayden King likes this.
  3. Rayden King

    Rayden King New Member

    Joined:
    Nov 27, 2013
    6
    2
    0
    Location:
    Costa Mesa, California
    Vehicle:
    2010 Prius
    Model:
    IV

    That sounds like a project for the morning! Thank you for your help.
     
    #3 Rayden King, Dec 30, 2013
  4. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    Yeah. You only need to remove enough fasteners so that you can squeeze your hands through the undercover to reach the back of the light assembly. Twist the bulb holder and pull out. Replace bulb and test. Reassemble.
     
    #4 spiderman, Dec 30, 2013
    Rayden King likes this.
  5. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    You only need to remove 3 fasteners per side, small, triangular covers directly under each corner. You don't need to remove any fasteners attached in the rear that's connected to the front of the wheel well liners. Just bend the cover down once the 3 fasteners are removed.

    SCH-I535
     
    #5 xliderider, Dec 30, 2013
    Rayden King likes this.
  6. Rayden King

    Rayden King New Member

    Joined:
    Nov 27, 2013
    6
    2
    0
    Location:
    Costa Mesa, California
    Vehicle:
    2010 Prius
    Model:
    IV
    Thank you for your help. The bulbs were burnt out and we are officially back in action. Again thank you so much.
     
    #6 Rayden King, Jan 1, 2014
    spiderman likes this.
(You must log in or sign up to post here.)