1. Attachments are working again! Check out this thread for more details and to report any other bugs.

OPT7 55w HID kit - Prius 2014 package 3

Discussion in 'Gen 3 Prius Accessories and Modifications' started by yoyoman, Dec 19, 2013.

  1. yoyoman

    yoyoman Active Member

    Joined:
    Apr 19, 2005
    342
    117
    0
    Location:
    San Jose California
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    I have found this hid kit (H11) for $69.95 at Amazon.

    Just wondering if anyone has used this before. Is this a decent good product?


    Turn off signatures in Tapatalk Tapatalk

    [​IMG]

    Screen capture from Amazon....


    Turn off signatures in Tapatalk Tapatalk
     
  2. Trung Quang

    Trung Quang Junior Member

    Joined:
    Dec 16, 2013
    12
    4
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    you should get them and tell me how they are. i'm thinking of getting a set.
     
  3. Paradox

    Paradox Prius Enthusiast / Moderator
    Staff Member

    Joined:
    Sep 22, 2005
    29,110
    8,591
    201
    Location:
    USA
    Vehicle:
    2014 Prius v wagon
    Model:
    Five
    Moved to accessories and mods
     
  4. yoyoman

    yoyoman Active Member

    Joined:
    Apr 19, 2005
    342
    117
    0
    Location:
    San Jose California
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Thanks. No wonder there is only 1 response.

    Just FYI, so far I have been using this hid for 3+ months. No issue so far....


     
  5. burstaneurysm

    burstaneurysm Active Member

    Joined:
    Apr 5, 2013
    469
    144
    0
    Location:
    Chicago, IL
    Vehicle:
    2010 Prius
    Model:
    III
    Check the warranty on em.
    You can get a kit from DDM for less with a warranty.
     
    Burna J likes this.
  6. randalla

    randalla Member

    Joined:
    Jan 22, 2004
    370
    2
    0
    Location:
    Lexington, SC
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    HI there! Did you end up purchasing the OPT7 and doing the install yourself? If you did, how/where did you do the power connection? thanks
     
  7. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,143
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    I have the OPT 7 Bolt 35w AC HID kit in my Camry. It is working fine with a self made dual relay wiring harness connected directly to the positive post on the battery.

    On the Prius, you have 2 options for power in the engine fuse box:

    [​IMG]

    There are two open terminals near the back of the fuse box that accept 1/4 in push on terminals, shown here with two red wires attached.

    Or, you can put a ring terminal under the bolt that is hidden under a cover, seen here with cover open, with small screwdriver pointing to the bolt at the top of the picture. Treat that bolt, and the terminals like they are positive battery posts, they are hot (powered) at all times, unless you disconnect the 12v battery in the hatch.
     
  8. randalla

    randalla Member

    Joined:
    Jan 22, 2004
    370
    2
    0
    Location:
    Lexington, SC
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    thanks for the info and the pic! I'll give the hook-up to the post a try when the OPT7 kit comes. Did you have any other issues in the Prius install like having to switch polarity to the ballasts? Did you use the relay harness with or without the capacitors? thanks
     
  9. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,143
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes, you have to reverse polarity to the ballasts in the Prius installation. I released the pins in the connector shell with a small screwdriver and removed and reinserted the pins with polarity reversed to preserve the locking function when the connectors are put together.
     
    randalla likes this.
  10. randalla

    randalla Member

    Joined:
    Jan 22, 2004
    370
    2
    0
    Location:
    Lexington, SC
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Thanks for the update! So did you also use the relay harness with or without the capacitors?
     
  11. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,143
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    As long as you get power from a reliable source, like the fuse box, and not the oem headlight circuit, then capacitors are not necessary.

    The 35w HID kit I installed (Innovited AC Ballasts) connected with a dual relay harness to the terminal at the back of the fuse box, lights up reliably, and is flicker free. Even when the car is ignition off, 12v auxiliary battery only, not off the 14.4v voltage present when in Ready Mode.
     
    randalla likes this.