Plug in supply new install, alittle advice please

Dont think the plug in supply does that to be honest.

From the limited test i done from the 1st charge i did notice the phev contactors coming in and out topping up the prius hv battery, but for sure my cell log alarms were triggered and the kit was still on, so i manually turned off the phev switch. This is something that i wil; have to rig up. I can use the cell loggers low v alarm, maybe also the pack low voltage setting on the jld404 and use the relay output from the jld404. Or maybe both, just to make sure.

Thanks.

 

Hi John,

The PIS rear board has a bms loop that i can use, it an alarm function occurs the bms loop is broken and the pis kit shuts down, thats the theory, when i get the kit fully working, i`ll wire it in and test it.
The charger was released from customs today, its on its way to the local delivery office, i may get it tomorrow, but probably monday now.

I`ll pm you the cell details.