1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Dog Divider for trunk

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Zen, Sep 2, 2013.

  1. Zen

    Zen New Member

    Joined:
    Sep 2, 2013
    5
    5
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    Got tired of dealing with subpar solutions. So i welded up a steel divider that fits into the head rest posts.
    [​IMG]
    ^^ thats without the bicycle tape. Could have taken more time with the welds, but its solid if not as pretty as it could be.

    [​IMG]


    Wrapped it with bicycle tape just to make it a little less industrial. thought about making another one that was cleaner looking than my first attempt and dipping it in that stuff that you can rubberize tool handles with. May add head rest padding to it so folks in the back have no change from regular setup.

    Also had the folks at Rack Attack install a roof rack capable of 165 lbs, which is the rating of the roof according to european specificications.

    [​IMG]

    [​IMG]

    Also had them put a hitch on so the bike rack we used with our 2006 could be used again. Love this car.

    I had originally made a form fit crate for the dog out of bending and chopping up and old crate. it slid in and out of the car with handles, but my dog outgrew it and stopped chewing things so we just put a dog bed back there now.

    Next we want to tint the windows and get the door ground guards.
     
    #1 Zen, Sep 2, 2013
    daddyd302 and Michael M. Maslowski like this.
  2. SuperGLS

    SuperGLS Member

    Joined:
    Jul 11, 2012
    200
    52
    2
    Location:
    Washington DC
    Vehicle:
    2013 Prius
    Model:
    Four
    That homemade setup looks pretty good. My dog would be constantly trying to stick her head through to get to the front I bet.

    Any pictures from behind with the hatch open?
     
    #2 SuperGLS, Sep 2, 2013
  3. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,143
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Zen, that looks good. (y)

    I'm thinking that for version 2, you could just use the center headrest post holes to mount your guard. You can make a couple of 90 degree or two 45 degree bends in the posts to offset the guard back for clearance to mount the side headrests. You might need to add an additional bar on the bottom near the angled bend to close off any space left open for your dog.

    This all depends on whether the guard will be adequately supported by just the middle headrest posts though. The plus is that people can sit in the two outer positions of the rear seat and have a safe headrest.
     
    #3 xliderider, Sep 2, 2013
  4. Zen

    Zen New Member

    Joined:
    Sep 2, 2013
    5
    5
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    Holy crap... thats a brilliant idea Xlider. I am going to do that. im going to lowes tomorrow.
     
    #4 Zen, Sep 2, 2013
    xliderider likes this.
  5. Zen

    Zen New Member

    Joined:
    Sep 2, 2013
    5
    5
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced


    im too lazy to bring car into sun for great lighting. let me know if you can see everything...

    [​IMG]
     
    #5 Zen, Sep 2, 2013
  6. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,143
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    I believe the center posts will provide enough support, as the posts extend down pretty deep into the seat.

    Don't know how much your guard weighs but it looks very sturdy. Doesn't need to be very large gauge bar at all.

    If it works out, save any templates/jigs you mock up, as I have a feeling people will want you to make more. ;) :D
     
    #6 xliderider, Sep 2, 2013
  7. Zen

    Zen New Member

    Joined:
    Sep 2, 2013
    5
    5
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    Also considering buying another dog bed and making a form fit out of both that sits in the OEM rubber tray (not in car in pictures) thats up to the old lady though as Sewing is not my strong suit.
     
    #7 Zen, Sep 2, 2013
  8. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,143
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Wow, your dog is truly a prince or a princess. ;)
     
    #8 xliderider, Sep 2, 2013
  9. SuperGLS

    SuperGLS Member

    Joined:
    Jul 11, 2012
    200
    52
    2
    Location:
    Washington DC
    Vehicle:
    2013 Prius
    Model:
    Four
    Thanks for the picture. Very cool setup.
     
    #9 SuperGLS, Sep 2, 2013
  10. riceroni87

    riceroni87 Senior Member

    Joined:
    Jul 2, 2013
    360
    598
    10
    Location:
    Oxnard, CA
    Vehicle:
    2013 Prius
    Model:
    Two
    that looks awesome. i chopped an old crate up too. i have two dogs and one of them ( a husky) likes to chew seat belts, plastic trim, carpet, anything it can get its mouth on when its bored.
     
    #10 riceroni87, Sep 2, 2013
(You must log in or sign up to post here.)