1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How to clean vent?

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by clgutierrez, Jan 26, 2013.

  1. clgutierrez

    clgutierrez Junior Member

    Joined:
    Jun 28, 2012
    51
    17
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    My C has accumulated small leaves in the ventilation vent (I assume thats the name) located at the bottom of windshield, see image.

    Any hint how to clean?



    Sent ?
     

    Attached Files:

  2. CMJAnew

    CMJAnew Junior Member

    Joined:
    Nov 1, 2012
    87
    17
    0
    Vehicle:
    2012 Prius c
    Model:
    Two
  3. Bullydog

    Bullydog Meus Prius

    Joined:
    Dec 2, 2011
    8
    0
    0
    Location:
    Tennessee
    Vehicle:
    2011 Prius
    Model:
    Three
    Shop Vac should do the trick
     
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,678
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Plus finetip tweezers.
     
  5. boppo

    boppo Active Member

    Joined:
    Mar 11, 2009
    799
    138
    0
    Location:
    Owego, NY
    Vehicle:
    2006 Prius
    Model:
    II
    On my cars I use a toothpick and a cat lint roller.
     
  6. Mr Incredible

    Mr Incredible Chance favors the prepared mind.

    Joined:
    Jun 23, 2008
    955
    506
    0
    Location:
    Neb
    Vehicle:
    2012 Prius c
    Model:
    Four
    Another for a shop vac. Maybe even a house vac, since there isn't much debris and it's small. Use a screwdriver or even a stick to poke into the holes to break up the leaves while you vacuum.
     
  7. TC400

    TC400 Active Member

    Joined:
    Apr 23, 2012
    751
    169
    0
    Location:
    Pittsburgh, PA
    Vehicle:
    2012 Prius c
    Model:
    Three
    I vote shop vac. I tried tweezers there is FOAM in there and I pulled some out so don't do that.
     
  8. clgutierrez

    clgutierrez Junior Member

    Joined:
    Jun 28, 2012
    51
    17
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Thanks for all your tips. I used a toothpick to let them loose (were almost solid after accumulating for some months, water running through the vent and sun drying them) and then vacuum. Most are gone, a lot better.

    Sent ?
     
  9. TC400

    TC400 Active Member

    Joined:
    Apr 23, 2012
    751
    169
    0
    Location:
    Pittsburgh, PA
    Vehicle:
    2012 Prius c
    Model:
    Three
    Glad to hear it worked!
     
  10. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,678
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Now how to get the pine needles out from under a prius rear scoop, air foil, wing, whatever it is.
     
  11. tabbott59

    tabbott59 Junior Member

    Joined:
    Jan 29, 2010
    3
    0
    0
    Location:
    North Carolina
    Vehicle:
    2010 Prius
    Model:
    III
    I thought of an idea that just might work if all of the others don't. Send those leaves back throughto vents where they came in with a leaf blower. Believe it or not, my son uses it (very carefully) to blow the dust from the fans on his gaming PC. The first time he tried it it was almost as if someone had popped a large balloon filled with a cup of flour. Leaf blowers are handier than I thought! I also used it to blow out the car and clear areas my vacuum couldn't get on the car I sold to buy our new Prius C .
     
  12. mastergunnera8

    mastergunnera8 Junior Member

    Joined:
    Jun 5, 2006
    93
    8
    0
    I use a leafblower to dry off my vehicles...then finish up with sham...its a smaller blower tho, must be careful with winds over 200mph especially under the hood...

    Glad to see you got the junk out...for the rear hatch wash out with your exterior wet wash method, then while wet, use the blower..then make sure you wax it well...will come off easier next time...DONT try and wipe it out of its dried out up there or you will scratch the paint...