Attempting a Nexus 7 permanent install while keeping factory stereo

Discussion in 'Gen 3 Prius Audio and Electronics' started by LoKeyYo, Apr 18, 2013.

Page 1 of 2
  1. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Hello,

    Well I don't know if this has been tried before but I'm trying to install a nexus 7 while keeping the factory stereo. I got everything figured out, I just need to work on the actual installation and work a few details here and there. Please note that I am not a professional installer and you will see some issues here and there. I will post the progress in this forum. Thanks.
     
    #1 LoKeyYo, Apr 18, 2013
    EdyJun likes this.
  2. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    My first question was, can the factory stereo works with out the face plate? can I use the steering control to control the volume. Well there is only one way to find out... faceplate.jpg
    stereo no faceplate.jpg

    Yup, The stereo works without the face-plate on. I can control the volume and select different sources from the steering wheel!! Now I have to figure out how to install the Tablet to an aftermarket double din cover...
     

    Attached Files:

    #2 LoKeyYo, Apr 18, 2013
  3. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    With some modification to the $14 Scosche TA2105B and a dremmel, I was able to get this point. I then covered everything with 3m carbon fiber vinyl. I also used a hot glue gun to secure the double din adapter to the outer plastic cover. Tablet not yet secured.jpg
     

    Attached Files:

    #3 LoKeyYo, Apr 18, 2013
    Fong likes this.
  4. EdyJun

    EdyJun Junior Member

    Joined:
    Oct 28, 2011
    58
    1
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    II
    Keep going!
     
    #4 EdyJun, Apr 18, 2013
  5. Cheesehead

    Cheesehead Junior Member

    Joined:
    Dec 16, 2012
    28
    2
    0
    Vehicle:
    2012 Prius
    Model:
    Two
    Subscribed!
     
    #5 Cheesehead, Apr 18, 2013
  6. brewcrew9

    brewcrew9 Member

    Joined:
    May 11, 2011
    111
    18
    0
    Location:
    Madison, WI
    Vehicle:
    2014 Prius Plug-in
    Model:
    Plug-in Base
    got my full attention.....
     
    #6 brewcrew9, Apr 18, 2013
  7. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Quick test on direct sun light using the HD® Anti-glare/Anti-fingerprint ScreenGuardz by BodyGuardz Protection for Mobile Devices | Screen Protectors, iPhone, iPad, Android, iPod, Blackberry, Skins, Covers, Protection, Cases, Shields. The nexus was setup to full brightness during the test. The screen is readable/usable but the colors are washed out. I drove a couple of miles with the GPS on and the signal is poor. I might try to relocate the GPS antenna somewhere else to see if I get better view of the satellites. Now I have to figure out power up the tablet.
     

    Attached Files:

    #7 LoKeyYo, Apr 20, 2013
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,166
    50,601
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    very cool!
     
    #8 bisco, Apr 20, 2013
  9. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    Don't be surprised if the hot glue gives out on a hot day. Sometimes you can grind up some of the plastic you cut out and mix it with some slow acting superglue, or acetone, to make a paste to adhere and fill gaps in the hard plastics. If all else fails, 2-part epoxy.
     
    #9 mgb4tim, Apr 22, 2013
  10. ny_rob

    ny_rob Senior Member

    Joined:
    Feb 28, 2012
    1,968
    813
    0
    Location:
    L.I.- NY
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Does the tablet's GPS work once it's imbedded in the dash like that?
    All the metal around it has to weaken the GPS signal.
     
    #10 ny_rob, Apr 22, 2013
  11. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    I used the hot glue to line up the plate with outer plastic trim because its way easier to use for that kind of job. I then used 5 minute plastic epoxy to secure it in place since is way stronger (180psi vs 2500 psi).

    I'm sure the GPS signal is weak, but the unit still able to lock to 9 birds quickly. I will be driving 6~7 hours tonight and that will be the ultimate test top see if the tablet is up to the task. I can always use an external Bluetooth GPS dongle just in case the one built in fails..
     
    #11 LoKeyYo, Apr 22, 2013
  12. ockevin

    ockevin Active Member

    Joined:
    Nov 24, 2011
    493
    148
    0
    Location:
    Orange County
    Vehicle:
    2011 Prius
    Model:
    Four
    #12 ockevin, Apr 28, 2013
  13. ockevin

    ockevin Active Member

    Joined:
    Nov 24, 2011
    493
    148
    0
    Location:
    Orange County
    Vehicle:
    2011 Prius
    Model:
    Four
    Here is a video of an install in a gen II prius.

     
    #13 ockevin, Apr 28, 2013
  14. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    LoKeyyo, any updates ?
     
    #14 ucsmfu, May 11, 2013
  15. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    my nexus 7 installed :)

    [​IMG]
     
    #15 ucsmfu, May 13, 2013
    LoKeyYo likes this.
  16. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    ucsmfu nice install!! Do you have any issues with the touch screen not recognizing some touches since the bottom part is deep in the din adapter?
     
    #16 LoKeyYo, May 13, 2013
  17. cwerdna

    cwerdna Senior Member

    Joined:
    Sep 4, 2005
    12,544
    2,123
    1
    Location:
    SF Bay Area, CA
    Vehicle:
    2006 Prius
    Interesting, but I wouldn't be surprised if the tablet ends up eventually failing due to the high in cabin temps (if the car is parked outside a lot) and temperature cycling. I wouldn't give it longer than a year or so.

    Consumer tablets, esp. cheap ones aren't designed for these types of applications.

    Oh yeah, and I doubt you care about the battery in the tablet, but if it's still attached and being topped off to 100%, it'll surely be almost worthless after a hot summer.
     
    #17 cwerdna, May 13, 2013
  18. NoMoreNow

    NoMoreNow Member

    Joined:
    May 13, 2013
    167
    102
    0
    Location:
    SF Bay Area
    Vehicle:
    2013 Prius
    Model:
    Two
    Awsome install! I got two spare Nexus 7 laying around.......maybe put in good use.
     
    #18 NoMoreNow, May 13, 2013
  19. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    at first I had problems with the drag down notifications at top, but than I fixed it while moving the tablet down further more.

    Now there's no problems :)
     
    #19 ucsmfu, May 14, 2013
  20. LoKeyYo

    LoKeyYo New Member

    Joined:
    Aug 24, 2012
    17
    7
    0
    Vehicle:
    2010 Prius
    Model:
    II
    cool, Im using this program (GMD GestureControl ★ root - Android Apps on Google Play) to control the tablet while driving. Two finger swipe from top bottom play/pause music. two fingers swipe from right to left to skip song and two finger swipe from left to right to go back. You can create your own gestures to open and control programs/settings.

    I haven't had a problem with my setup yet. but I am planing to add a on/off button somewhere in the dash just in case the tablet crashes and need to be restarted.

    If you want you can disconnect the battery, but you will have to use this command on fast boot (fastboot oem off-mode-charge 0)

    This command sets auto power on instead of charging, but I haven't tried yet because I don't need it with the custom ROM I'm using. (Timur's Kernel - USB ROM - USB Host Power Management - USB Audio - Nexus 7 Development - RootzWiki)
     
    #20 LoKeyYo, May 14, 2013
(You must log in or sign up to post here.)
Page 1 of 2