Yeah! You are just as likely to scratch something up by ripping apart to whole consol, too. The plastic tools are a good investment .
Easier to snake wires, and I had to drill a hole in the center to mount a momentary switch to. Its easier to drill those blanks from the back side because there's arms that help center the hole and prevent skating.
Please remember that the ejector seat package was a JDM-only option. IF you buy a used car with this option and attempt to use it, be duly warned that it fires under the LEFT seat!
Then you should use the IPA (Immediate Passenger Abandonment) system in pre-support mode. When you press the pre-support switch, the car will use the sensors on the roof to detect a suitably-large open space above the car, and then chime twice to tell you to hit the button.
