1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Found these "parts" next to my spare tire, any ideas???

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by The Dude, Feb 18, 2013.

  1. The Dude

    The Dude Member

    Joined:
    Jan 24, 2013
    197
    32
    0
    Location:
    Phoenix
    Vehicle:
    2010 Prius
    Model:
    II
    I was checking the air pressure on my spare earlier and found these just sitting next to the tire. One is a white clip looking piece about 1.5" long and the other is what appears to be a cover of some sort and it measures approximately 3.25" long and 1.5" wide.

    Any ideas what these are???

    Input would be appreciated.

    Btw, 2010 II is what I have. Thanks everyone. 2013-02-17_23-43-53_941.jpg 2013-02-17_23-44-12_515.jpg
     
    #1 The Dude, Feb 18, 2013
  2. elobster

    elobster Lobster

    Joined:
    Jan 19, 2013
    5
    2
    0
    Location:
    Adelaide, South Australia
    Vehicle:
    2016 Prius
    Model:
    i-Tech
    Hi Dude,

    I'm not sure about the clip, but the black rectangular cover was fitted into a matching hole in the large plastic bin, that is placed over the spare wheel.

    I removed mine as the hole forms the handle for lifting up the bin to access the spare wheel.

    I didn't replace mine, I put it in a box with my wheel covers.

    Cheers, Steve
     
    #2 elobster, Feb 18, 2013
    The Dude likes this.
  3. The Dude

    The Dude Member

    Joined:
    Jan 24, 2013
    197
    32
    0
    Location:
    Phoenix
    Vehicle:
    2010 Prius
    Model:
    II
    Thank you Steve. Glad to know that it's not a "critical" performance component! Now about that plastic clip...man this thing's absolutely full of plastics...sad really
     
    #3 The Dude, Feb 18, 2013
  4. El Dobro

    El Dobro A Member

    Joined:
    Jul 12, 2011
    7,027
    3,241
    1
    Location:
    NJ
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    IIRC, the black plastic cover is for access to the hatch release if the 12V battery goes belly up.
     
    #4 El Dobro, Feb 18, 2013
  5. The Dude

    The Dude Member

    Joined:
    Jan 24, 2013
    197
    32
    0
    Location:
    Phoenix
    Vehicle:
    2010 Prius
    Model:
    II
    So, it's not the part elobster described???
     
    #5 The Dude, Feb 18, 2013
  6. El Dobro

    El Dobro A Member

    Joined:
    Jul 12, 2011
    7,027
    3,241
    1
    Location:
    NJ
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    Nope. If you look through the tray where the hole is, you'll see the manual release for the rear hatch. That's so you can get to it while the tray's still in the car.
     
    #6 El Dobro, Feb 19, 2013
(You must log in or sign up to post here.)