Finally got my PIP from the dealer today. I found out that Toyota does not recommend letting the charging cable hang from the outlet. Instead, it should be hooked onto something. What kind of hook is everyone using? Pictures would be great.
oh my god that looks scary… anyway, when i charge at home, the outlet is in the laundry room, and next to the washing machine, so the brick rests on the washing machine. when i plug somewhere outside, i do try to make sure that the brick rests on something, even if it means contorting the charge cable weirdly when it comes out of the outlet.
it DOES doesn't it. I don't have that setup all the time and I come outside frequently to check on it when I do use that setup.
The charging cable's brick has a hole in one corner. Loop a Ziptie or a wire loop through it and then you can hang the heavy brick from whatever is handy nearby.
There's no catagory for my situation, which is uses an extension cord to reach the car, so PIP cable is always on the ground.
If, I must charge outside using a extension, the I put a small piece of rug over the junction at the eXtension plug, in the rain.
I changed the Plug of my Cable to a Right-Angle Plug, so the weight of the brick doesn't pull the plug out.
I use a rubber-coated hook designed for hanging bikes from the garage rafters or ceiling. One of the larger ones holds the coiled cable and the connector just fine. I used to have photos on here, but can't seem to find them now. img_9004_46557.jpg Maybe this link will work?
At work I use a small stretch bungee looped to itself, that then hangs of the outlet in the underground garage I park at, I'll update with a picture
That sounds like a novel idea. I am going to install a hook, but I like the concept of a bungee cord. Where did you get the bungee?