1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Passive CAN messages

Discussion in 'Gen 3 Prius Technical Discussion' started by trtracer, Oct 1, 2012.

  1. trtracer

    trtracer Junior Member

    Joined:
    Oct 1, 2012
    3
    1
    0
    Vehicle:
    2012 Prius
    Model:
    N/A
    Hi all,

    I successfully connected my Raspberry PI to the CAN-Bus and sniffed a bit. Unfortunately the IDs Attila Vass found out for his Gen2 are different to the Gen3.

    The mycanscan-Project on SF has a few codes for Gen3- but the most of them i already found by myself.

    Has anyone made some progress in analyzing the passive messages on the CAN-Bus?

    Tobias
     
    #1 trtracer, Oct 1, 2012
    GG707 likes this.
  2. otmezger

    otmezger Junior Member

    Joined:
    Oct 18, 2012
    3
    1
    0
    Vehicle:
    2012 Prius
    Model:
    III
    Hi Tobias,

    I'm looking for a CAN Message for Gen III that is related to fuel consumption. Do you have any ideas where to start looking/analyzing? Thanks.
     
    #2 otmezger, Oct 18, 2012
    GG707 likes this.
  3. trtracer

    trtracer Junior Member

    Joined:
    Oct 1, 2012
    3
    1
    0
    Vehicle:
    2012 Prius
    Model:
    N/A
    I've found many status-bits and the Eco/Power/Charge-Value. But I've no idea how to find (very slowly changing) values like the avg. or even current fule consumption.

    Though there are many passive messages on the bus i'm not sure that such detailed infos are "posted" without a request. There is no really need, neither for the user, nor for the electronic.

    Are you only looking for these specific messages or have you analyzed the messages in general? Maybe we can share what we found out?
     
    #3 trtracer, Oct 18, 2012
  4. ganescha

    ganescha New Member

    Joined:
    Dec 1, 2013
    1
    3
    0
    Vehicle:
    2009 Prius
    Model:
    Four
    I've found and decoded several messages such as SOC, steering angle, vehicle speed, wheelspeeds, throttle position, energy bar (from the display), mode of the drivedrain, position of the gearshift, relative time after IGK on, ...

    I've used busmaster and an ES581 from ETAS as interface. Later on I will put this into a Raspberry with an MCP2551/15 as interface. And a touchscreen as HID.

    Here's a dbc (CAN description file). I will try to update this file from time to time. Also feel free to extent it and add your discoveries!!
     

    Attached Files:

    #4 ganescha, Dec 1, 2013
    GG707, Jiajie Liang and aurispilot like this.
  5. aurispilot

    aurispilot New Member

    Joined:
    Jan 22, 2015
    8
    0
    0
    Vehicle:
    2014 Prius
    Model:
    N/A
    hello ganescha,

    I downloaded your dbc. I hope it works also on an Auris 2, or at least parts of it. I also saw, that the names are in german. Bist du aus Deutschland oder Österreich? (ich bin aus Österreich)

    Do you have an updated version? I will do some work on my Auris in a few months, so I can also give you the IDs and descriptions that I will find out.

    anyway, thanks for this file here :)!
     
    #5 aurispilot, Jan 22, 2015
  6. Sergio-PL

    Sergio-PL Member

    Joined:
    Jun 24, 2011
    160
    46
    0
    Location:
    Poland
    Vehicle:
    2011 Prius
    Model:
    N/A
    #6 Sergio-PL, Jan 28, 2015
  7. aurispilot

    aurispilot New Member

    Joined:
    Jan 22, 2015
    8
    0
    0
    Vehicle:
    2014 Prius
    Model:
    N/A

    yes, meanwhile I also read through all those Posts. That Looks quite good. I will try that.

    best regards
    Hannes
     
    #7 aurispilot, Jan 29, 2015
(You must log in or sign up to post here.)