1. Attachments are working again! Check out this thread for more details and to report any other bugs.

My Tablet Mount for Dash

Discussion in 'Gen 2 Prius Accessories & Modifications' started by rosco64209, Jul 17, 2012.

  1. rosco64209

    rosco64209 Junior Member

    Joined:
    Dec 14, 2011
    15
    3
    0
    Location:
    FL
    Vehicle:
    2006 Prius
    Model:
    N/A
    Should of put this in the electronics section. So I mounted my Transformer Prime using the Koala Mount from Dockem.com I used 3m VHB double sided foam tape. This is by no means final, i know its off center (due to the parking break button) and a fraction tilted one way (its only noticeable in the photo, it doesnt look as bad in person). I just wanted to get this idea out there becuase im enjoying it alot!

    [​IMG]
    [​IMG]
    [​IMG]


    Future plans are to:

    1. modify left mount to straddle the parking button a little so it can be more center.

    2. retape so you cant see as much tape from the side and top. But it looks good to me now as it is and ive been testing it for about a week now. At the angle it sits at, you dont see any reflections of the windows. I had another mount that was more straight up and down and you could see the the windows and the person in the pasenger seat very well when its daytime.

    Things i like about this mount:

    1. the plastic mounts are very light and sturdy. so they wont be constantly trying to peel away from your dash when its sitting in the sun. By the way VHB stands for very high bonding so this mount is gonna stick. Ive also used this VHB tape on my previous mount and it didnt leave any marks or damage after i removed it.

    2.alot of surface area for double sided tape. roughly 3/4"x3"

    3. mounts have a clip for my charging wire and headphone wire. Would like to run wires so they arent exposed some day.

    4. very slim profile. the tablet looks really flush when mounted

    5. Snug fit. The tablet doesnt move at all when driving, unless you are going over speed humps constantly.

    More Info:
    3m VHB tape Info 3M™ VHB™ Tape - High-strength bonding tape is a proven alternative to screws, rivets, welds and other forms of mechanical fasteners - 3M US
    Where i bought my 3m tape (8127A87) McMaster-Carr
    Where i bought koala mount Koala Damage-free iPad Wall Mount
     
    BigTim likes this.
  2. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    what, you got your ipad hooked into the car? does the '06 have aux and ipod ports?
     
  3. rosco64209

    rosco64209 Junior Member

    Joined:
    Dec 14, 2011
    15
    3
    0
    Location:
    FL
    Vehicle:
    2006 Prius
    Model:
    N/A
    Yes I do have my Asus Transformer Prime hooked up in my 06 prius and I use it for many reasons (GPS, torque program, pandora, movies and tv shows, etc). I have the original JBL System with the aux port (3.5mm headphone port) being in the middle console/armrest.
     
  4. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    sure wish i had an aux port in my '05...
    i don't want to pay $150 for it though.
     
  5. Daves09prius

    Daves09prius Active Member

    Joined:
    Nov 20, 2010
    680
    161
    0
    Location:
    Gettysburg, PA
    Vehicle:
    2009 Prius
    Model:
    One
    Looks nice, wish I had an aux input too... Looks great for long trips and watching movies!
     
  6. Agent J

    Agent J Hypoliterian

    Joined:
    Apr 27, 2010
    294
    111
    0
    Location:
    Sydney, Australia
    Vehicle:
    2007 Prius
    Model:
    N/A
    nicely done and very clean... i was about to do something like that before, but doing so blocked a few useful controls. so i thought i'd use the lower console cover and 'velcroed' a door hinge and another thin velcro strip underneath the top portion of the opening. this will stick to the other velcro on the back and side of my 7" tablet. if i don't want to use the tablet, i'll just fold the door hinge a bit and i can close the cover completely. :)
    SSCN0111.JPG SSCN0110.JPG SSCN0112.JPG SSCN0107.JPG SSCN0108.JPG
     
    David S likes this.
  7. rosco64209

    rosco64209 Junior Member

    Joined:
    Dec 14, 2011
    15
    3
    0
    Location:
    FL
    Vehicle:
    2006 Prius
    Model:
    N/A
    @Agent J
    Very nice! I really like the hinge idea, very creative. Is that 5 displays i count in there? That is alot of info at your fingertips. What do you monitor? Buttons wise i haven't had a problem with covering any that i use alot. The Volume control and audio button were the only buttons i was using before i put my tablet in there. Now i just use the steering wheel controls. It also covers up the mpg but if i need to know that i can just switch over to the Torque app.
     
  8. Agent J

    Agent J Hypoliterian

    Joined:
    Apr 27, 2010
    294
    111
    0
    Location:
    Sydney, Australia
    Vehicle:
    2007 Prius
    Model:
    N/A
    Thanks, rosco64209... my original plan for the tablet was for Torque but apparently the OBDII can't simultaneously feed info to SGII. so i chose the latter. I'm now looking at the Priidash. For me, the 4 gauges i view mostly are BTA, SOC, IGN, and RPM. the rest i just glance from time to time. The small one on the left is just a tire pressure monitor. anyway, back to the thread topic.. :) The angle of your tablet is ideal. The problem i have with mine is mostly glare coming from above. It's fine at night, but during daytime, the screen loses contrast. might be the screen protector though..
     
  9. flareak

    flareak Fleet Captain

    Joined:
    Mar 9, 2004
    1,016
    20
    0
    Location:
    St Louis, MO
    Vehicle:
    2005 Prius
    Model:
    N/A
    fantastic! i was thinking of purchasing a nexus 7 to use as a GPS and media player. Thankfully my radio controls are all routed to my head unit which sits in the cubby hole now.
     
  10. tf4624

    tf4624 Active Member

    Joined:
    Dec 4, 2009
    526
    51
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    N/A

    got to love this.. i have a defender case on mine.. will the Koala Damage-free iPad Wall Mount fit it ?
    how good is the mount.. sturdy?
     
  11. Ronnyguru55

    Ronnyguru55 New Member

    Joined:
    Oct 11, 2014
    4
    0
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius
    Model:
    Four
    Take a look at MagBak - I'm going to try it it.
     
  12. sidecar

    sidecar Member

    Joined:
    Dec 29, 2010
    342
    44
    0
    Location:
    Australia
    Vehicle:
    2008 Prius
    Model:
    II
    could possibly hook to the OBD port as well
    myriad of data there