xenonsupply.com - H.I.D. kit. My personal review.

Thanks for the review and photos. I had Xenon Supply HIDS on my to-do list after seeing their ground-wire shadowless demo and install video on YouTube. Are these the premium slims or regular models? I was a bit skeptical about their pricing but your photos convinced me!

 

Great to see a plug-n-play HID kit!!! I'm from the UK and this looks a great kit, VERY interested!

What would you say the % increase is light output wise over Stock bulbs? I have upgraded Philips bulbs that say 100% more output, they certainly add a LOT more light on the road etc than the stock so wondering whether the upgrade it worth it? Obviously you get a power gain aswell as these draw less.

Did you go for the 4300K or 6000K, i;d probably opt for the 4300k as it says these give out the max light.

 

BigPete: jump on eBay and have a look at 'Alltronix' seller. Customer service is awesome. I got the canbus, h11 35w 4300k kit from him

 

thanks for the very comprehensive review and DYI, great pictures! Were you able to determine what caused the squares to appear above the cutoff line? They seemed to show up only at close range, which led me to believe the driving lights above the main projectors. But in your photos it looks like the same white as your HID's. Are they produced by the projector lens or did you change the color of your driving lights as well?

 

Ok cool can you send a link, unsure how to search by seller, duh!!! Are they a straight fit like the ones mentioned in this post, look SO easy to fit.

 

I just picked up the same kit and its on its way. I bought directly off Xenonsupply and used their facebook code. Not sure if I need it but I also got the wiring harness to go with it.

Btw what kind of camera are you using to take the photos? Camera phone? I was hoping to get more output than that from the kit so Im wondering if its your camera compensating for a brighter light.

I'll snap before and after myself with my DSLR if I can.

 

Looking forward to the shots!

 

I got the same kit about a month ago. In my install, the squares above the cutoff line was present with the OEM halogen bulbs as well. It must be the design of the projectors and has nothing to do with the HID bulbs. Overall, the light output has at least doubled and the color of the light makes things look more natural.

I also got the wiring harness. I didn't want to risk frying the stock wires/circuit/relay powering the ballasts. However, I didn't get it from them. I got 2 harnesses from eBay for $16 delivered. I wanted to have independent relay per side so if there is any problem with the relay or the fuse, only one light will go out and I can still drive home with the other light. With the single relay harness XenonSupply is selling, if there is a problem with the harness, both lights will go out . Didn't want to go there.

 

Pop this number into the search on eBay and it'll take you straight to the kit. 230604115475

And yes, straight fit, watch the video on xenon supply and how he fits it, it's a very good and clear video. Definitely pop the sound panels off with a Phillips though and hide the ballasts, nice and safe and also looks clean and tidy

 

Great posts! Thank you!

 

Did you use the Premium, slim ballasts, and did you use the relay wiring harness, or harness's? I would think that to use the relay harness would be a real hassle since the battery is in the trunk, right?

 

For the relay harness, you can tap into the positive terminal in the fuse box just right of the engine. No need to run a wire to the battery in the trunk. I saw a picture on another thread where in the fuse box. Here is a picture I copied from that thread. Other members did not use any relay harness and reported no problems. I did it because is was cheap insurance against frying your stock wires. It's a little more work but worth it in my book.

5000k HID lights in Winter Gray Prius IV | PriusChat

 

Great link! Have you got any photo's of the light output? I have upgraded Philips bulbs ib mine, unto 100% more light and I have to say they are pretty good, so just unsure of what to do!!!

 

If you want to ring me you can pm me?

4300k | 35W | H11

hid low with High set to 2 (Halogen High)



Low beam set to 5



Low beam set to 0