Door edge guards - how do you put on?

Discussion in 'Newbie Forum' started by bsanorton, May 1, 2012.

  1. bsanorton

    bsanorton New Member

    Joined:
    Apr 12, 2012
    6
    2
    0
    Location:
    St. Augustine, FL
    Vehicle:
    2012 Prius
    Model:
    Two
    I ordered door edge guards for my wifes 2012 Prius, they are a tight fit as they should be. Can I use soapy water or silicone to help them slide on? I don't want to damage the paint underneath.
     
    #1 bsanorton, May 1, 2012
  2. krazypriuslady

    krazypriuslady Member

    Joined:
    Mar 17, 2012
    232
    12
    0
    Location:
    metro Wash DC
    Vehicle:
    2011 Prius
    Model:
    Three
    I don't know the answer but you might get a response if you ask your question in the MODS sections of the model you have. :)
     
    #2 krazypriuslady, May 2, 2012
  3. SquallLHeart

    SquallLHeart The Techie Guy

    Joined:
    Mar 10, 2012
    826
    247
    5
    Location:
    San Jose, CA
    Vehicle:
    2012 Prius c
    Model:
    Two
    mild soapy solution should be fine... don't be afraid to be liberal about it.
     
    #3 SquallLHeart, May 2, 2012
  4. bsanorton

    bsanorton New Member

    Joined:
    Apr 12, 2012
    6
    2
    0
    Location:
    St. Augustine, FL
    Vehicle:
    2012 Prius
    Model:
    Two
    Apparently you use the soft side of a mallet and have to use templates to know where to position them. This is not included in the package. got them from the accessory folks. They are a pressure fit. I still might use some soapy water
     
    #4 bsanorton, May 2, 2012
  5. PhilWray

    PhilWray Member

    Joined:
    Jan 2, 2008
    82
    28
    0
    Location:
    Malaysia
    Vehicle:
    2007 Prius
    Model:
    II

    If this is on-line can you post a link please?
     
    #5 PhilWray, May 2, 2012
  6. willrob

    willrob Junior Member

    Joined:
    Apr 3, 2012
    33
    6
    0
    Location:
    Madison, Wisconsin
    Vehicle:
    2012 Prius
    Model:
    Two
    #6 willrob, May 4, 2012
    1 person likes this.
  7. Fore

    Fore Don't look back!

    Joined:
    Feb 1, 2011
    494
    107
    0
    Vehicle:
    2010 Prius
    Model:
    II
    You need to buy a rubber mallet and hit per the instructions pretty hard to get it to seat properly. I would suggest not to use soap because it may not crip into place and stay there. This is what I had to do, just giving you my two cents.
     
    #7 Fore, May 4, 2012
(You must log in or sign up to post here.)