With a fab, all doors unlock as i approach EXCEPT for the rear driver door. This door will unlock if i double press the unlock button on the fab or use the unlock button in the car. I have searched for a similar thread without luck. Please help!
Do the 2 passenger doors open with 1 or 2 presses of the fob? The default from the factory is that 1 press unlocks the driver's door and a 2d press will unlock the rest.
Driver door opens with 1, all others open with 2. It's a 2010 iv solar roof if that makes any differences.
smart sensors are only on the front doors and the hatch (3 total). the rear doors can only be unlocked by switch or fob.
I think you can reprogram it for all doors by holding down both buttons on your fob for 5 seconds. I think the car makes a chirp when the change occurs. I did this on ours quite some time ago.
On my 2012 I can program the door locks in the head unit, setup, car, door locks all doors and hatch or not. One press and all door unlock.
This fixed it for me. It's on page 117 of the manual. Oddly, the one-touch unlock setting made with the radio's touch screen didn't work; I guess this does something different.
