1. Attachments are working again! Check out this thread for more details and to report any other bugs.

To hang or extension cord?

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by krishkal, Apr 14, 2012.

  1. krishkal

    krishkal New Member

    Joined:
    Nov 17, 2011
    21
    1
    0
    Location:
    Fremont, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    The plug at work is about 4-5 feet off the ground, and no provision to be able to hang the charger box. So, I have a conflict of instructions: Toyota says not to let it hang by the plug, and it also says not to use an extension cord. I am thinking that the best alternative is a short (6') heavy duty appliance extension cord. Does this sound reasonable, or should I just let it hang out there as I have been doing so far?
     
    #1 krishkal, Apr 14, 2012
  2. ukr2

    ukr2 Senior Member

    Joined:
    Feb 5, 2007
    1,009
    275
    31
    Location:
    Victor, NY
    Vehicle:
    2021 Prius Prime
    Model:
    XLE

    I also use the right-angle appliance cord. Works fine.

    Try to add a hook under the outlet or something to keep the EVSE's box off the ground.
     
    #2 ukr2, Apr 14, 2012
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    or a stick with one end on the ground and a hoozie on the other end to prop up the charger box.
     
    #3 bisco, Apr 15, 2012
  4. SCDrJ

    SCDrJ New Member

    Joined:
    Jun 18, 2006
    120
    20
    0
    Location:
    Orange County, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    12/3 ga., 15 amp 25 foot extension cord is what I use. No issues so far.
     
    #4 SCDrJ, Apr 15, 2012
  5. krishkal

    krishkal New Member

    Joined:
    Nov 17, 2011
    21
    1
    0
    Location:
    Fremont, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I got a 12 gauge 6' extension cord from Home Depot, and now I can comfortably rest the brick on the hood of my car with no problems. Problem solved! Thanks for the replies.
     
    #5 krishkal, Apr 16, 2012
  6. drinnovation

    drinnovation EREV for EVER!

    Joined:
    Dec 10, 2011
    2,027
    586
    65
    Location:
    CO
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I have a rubber bungie that I carry with my EVSE and when in the garage at the Univ, I strap it to the column where there the plug is.. (since rain can enter on the level where I park.. I don't want the EVSe, but especially not an extension cord, lying on the ground).
     
    #6 drinnovation, Apr 16, 2012
  7. DadofHedgehog

    DadofHedgehog Active Member

    Joined:
    Jun 17, 2012
    681
    282
    0
    Location:
    northern Virginia
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    The Toyota EVSE brick has a li'l hole on one corner. I put a thick zip tie loop through that hole, and now I can hang the EVSE brick off the wall if there is anything I can use as a hanging point when I charge away from home (I have a L2 home charger).
     
    #7 DadofHedgehog, Jun 24, 2012
(You must log in or sign up to post here.)