Replaced driver side front door glass. Auto up doesn't work!

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by ScottY, Mar 10, 2012.

  1. ScottY

    ScottY New Member

    Joined:
    May 18, 2005
    1,250
    7
    0
    Location:
    Long Island, NY
    Vehicle:
    2005 Prius
    Car was broken in last night. Went to a near by auto glass shop to get the glass replaced. After the glass replacement, the window will lower half way after it reached the top using the auto up function (pull up and release). It stays up if you hold the switch up. Any ideas why that is? Seems to me the jam protection is activated, according to the manual.
     
    #1 ScottY, Mar 10, 2012
  2. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    You probably need to reset it. The procedure is in the Owner's Manual
     
    #2 firepa63, Mar 10, 2012
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,489
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    You could try disconnecting the 12V negative battery cable for a few minutes. Then, reset the driver's window auto up feature.

    If you still have a problem, then I suggest you return to the auto glass shop and ask for help, as there may be an installation problem.
     
    #3 Patrick Wong, Mar 10, 2012
(You must log in or sign up to post here.)