I am trying to equip my euro-Prius with the plasmacluster. The full loaded package in EU doesn't have the PC - i like those gimmicks and believe it works an will not kill me and my family. so here is my project: I ordered the "ion generator" (88051-12010). Now I want to bench test the unit before tearing apart my car ;-) did any one do this before? did any one bench test the ion-generator before? does any body have a wiring diagram of the PC-unit (not the Prius)? does any body know the switching condition (pin1(PCSW) and pin4(PCD1) to trigger the modes (stop, clean, ion-generation)? it should be easy to measure the two signals accessing plug LI2 just above the upper glove compartment (pin9"light green" and pin 7 "Pink"). it is accessible without tools - I did it - but unfortunately the EU Prius doesn't have the Harness installed that goes to the A/C Amp Assy and I do not know if the EU-Prius is programmed so it would communicate to the ion generator. And the A/C Amp plug (L17-17-36) isn't accessible that easy. I am looking forward to discussing that issue any thoughts? T.
