1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Let the mods begin..

Discussion in 'Gen 3 Prius Accessories and Modifications' started by alfa737, Sep 26, 2011.

  1. alfa737

    alfa737 Member

    Joined:
    Sep 8, 2011
    126
    27
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    II
    Hi guys,
    just got my 2011 prius 2 a few weeks ago and thought I share what I did so far and get some ideas of future mods.

    first i got leather installed because i have 2 kids and leather would be easier to clean.
    1700 done by the dealer where i bought the car
    diff 290.jpg

    next was the Macally MCUP Universal Cup Holder Phone Car Mount
    for my EVO 4G.
    i would not recomend it because when you try to secure it in the cupholder the cover moves and it is not such a secure fit...
    diff 291.jpg
    diff 292.jpg

    Next came the blank metal plate cover. front and back. I didn't like the free plastic ones they put at the dealership with their name on it. if they want me to advertise for them them then they better pay me;)
    diff 283.jpg

    Thanks to this forum, some one had installed the husky weather beater prius liners for the front and cargo area. they are a gr8 fit but be careful removing the anchor hooks from the floor. i broke one while trying to pry them out.
    diff 284.jpg
    diff 285.jpg
    diff 286.jpg
    diff 287.jpg
    diff 288.jpg
    diff 289.jpg

    last but not the least i replaced my shifter with the OGS shifter.
    this is my fav so far. makes the car look unique. very easy mod took about 10 min. :D
    diff 294.jpg
    diff 295.jpg
    diff 296.jpg
    diff 297.jpg
    diff 298.jpg
    diff 299.jpg
    diff 300.jpg
    diff 301.jpg
    hadi surprise bday4 041.jpg
    hadi surprise bday4 042.jpg
    hadi surprise bday4 043.jpg
    hadi surprise bday4 044.jpg

    I am planing on doing the wheel cover removal and some thing special with the head unit...stay tuned.
    what are some other ideas you guys have . i am all ears .:p
     

    Attached Files:

  2. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    The mods look great!

    Future Mod Ideas:
    Clear bra (I can't stress this enough)
    TRD rear sway bar
    HID headlights
    Scangauge II
    Sun visor (priuschat shop)
     
  3. Johhhn

    Johhhn Junior Member

    Joined:
    Sep 22, 2011
    48
    2
    0
    Location:
    Albuquerque, NM
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Which clear bra? So many conflicting opinions, its confusing.

    I just bought a new prius 2 nights ago and want to protect the front end asap!
     
    ukulelegeek likes this.
  4. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I wish I could answer that for you but have not performed enough research to know which brand is the best I just wish I had installed the clear bra when my car was new. Rocks have destroyed the front end of my car.

    N umerousfolks here on PC have had the clear bra installed so I would search the Geniii modifications forum for more information. I'm glad to see you are interested. This is one of the few mods that can boost your resale value.
     
    ukulelegeek likes this.
  5. alfa737

    alfa737 Member

    Joined:
    Sep 8, 2011
    126
    27
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    II
    These are good ideas.thanxs..i was looking into the clear bra too.. can i do it myself or is it something better left to the dealer?
     
  6. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    It is better left to a professional installer. A lot of places that do window tint and full car vinyl usually do clear bras.
     
    ukulelegeek likes this.
  7. alfa737

    alfa737 Member

    Joined:
    Sep 8, 2011
    126
    27
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    II
    Here are the latest additions to my 2011 prius II
    your comments are welcome.

    Bought the prius LED interior Kit from 2010 2011 Toyota Prius Complete 326-Lights LED Interior Light Package

    easy fit, 20 mins job
    [​IMG]


    [​IMG]


    Much brighter than the OEM lights..

    [​IMG]

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    The kit even came with LED parking lights.

    [​IMG]

    Here is the back seat are,, I have two kids so i just added the seat back protection and the other thing to protect the leather from spils and other sticky stuff that is always attracted to small children

    [​IMG]


    [​IMG]

    I removed the Wheel covers and put soom cheapo ($16 for 4) center caps from ebay...I think the wheels look better without the covers and no reduction in MPG or increase in noise..

    [​IMG]

    [​IMG]


    Added this phone holder to the vent. must have for hands free comunication if you dont have the built in Bluetooth.

    [​IMG]

    [​IMG]


    I think the small area on the side is perfect to attach a GPS ..

    [​IMG]

    I did another cool Mod but i will create a new thread for that.


    what do you guys think?
     

    Attached Files:

    ukulelegeek likes this.
  8. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,970
    2,617
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I see you have a Prius II. Better head over to the Gen III Audio/Electronics area and read Spiderman's sticky post about how he custom- installed an in- dash GPS/stereo head unit.
     
  9. priusrick

    priusrick Member

    Joined:
    Sep 14, 2011
    257
    40
    14
    Location:
    Texas
    Vehicle:
    2011 Prius
    Model:
    Three
    Shifter, has anyone figure out how to change buttons around so that Drive is in "thumb" position, etc.
     
  10. alfa737

    alfa737 Member

    Joined:
    Sep 8, 2011
    126
    27
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    II
    I have been using it for a while now and have gotten used to it.. dont even think about it now, the fingers automaticaly go there now... but thats just me. :rolleyes:
     
    ukulelegeek likes this.
  11. priusG

    priusG Junior Member

    Joined:
    Nov 10, 2011
    30
    15
    0
    Location:
    Los Angeles
    Vehicle:
    2011 Prius
    Model:
    N/A
    I really like your leather seat!
    I would do that too!
     
  12. priusrick

    priusrick Member

    Joined:
    Sep 14, 2011
    257
    40
    14
    Location:
    Texas
    Vehicle:
    2011 Prius
    Model:
    Three
    I don't trust my pinky to hit the drive button when necessary.
     
  13. alfa737

    alfa737 Member

    Joined:
    Sep 8, 2011
    126
    27
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    II
    I think they are katkin or katskin. had them instaled by the dealer for 1700. It was worth it since i went for the prius II and dident add any additional options..
     
  14. alfa737

    alfa737 Member

    Joined:
    Sep 8, 2011
    126
    27
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    II
    That was my concern too initially but the switch top is grooved and the hand fits in it nicely so it doesn't feel un natural... but it is worth it for the look i get when i go in for car wash and the guy has to move my car into the slot...:confused:
     
  15. harry r

    harry r slowly turning green

    Joined:
    Oct 31, 2010
    122
    18
    0
    Location:
    NW of chitown
    Vehicle:
    2010 Prius
    Model:
    III
    I like the ogs shifter. Where can I find one and how much are they. Google did not help.
    Tks
    Regarding the clear bra, I had a local installer working out of his home do it for my 2010 using 3m. It looks great and from what I read is one of the best. I think I paid about $450.
     
    ukulelegeek likes this.
  16. hsumaomao

    hsumaomao Junior Member

    Joined:
    Nov 21, 2011
    15
    0
    0
    Location:
    CA
    Vehicle:
    2010 Prius
    Model:
    Three
    The only thing holding me back on the LED interior lighting kit is the price tag...
    ~"~
     
  17. manny13

    manny13 Junior Member

    Joined:
    Oct 7, 2011
    7
    0
    0
    Location:
    Queens, NY
    Vehicle:
    2011 Prius
    Model:
    II
    Alfa737, how did you change the colours on your ESS. I will be installing mine soon. Thanks.
     
  18. ukulelegeek

    ukulelegeek Active Member

    Joined:
    Jan 2, 2022
    157
    109
    0
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Three
    Congrats on your new baby! And thanks for the pics of your mods. I think that shifter is pretty nifty, but my budget keeps me from doing that. Also, I'm not great at DIY stuff on cars.
    We just took my 2010 on a 9 state, 3,000 mile trip, and it did great. The only thing that was a bother were the foggy headlights. I've cleaned them twice, but they quickly fog up again. I used a 3M kit from NAPA.
     
  19. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,422
    3,410
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Did you sand them?
    I've used Mother's Aluminum polish a few times and it works very well.
    But it's time to sand that top layer off.

     
  20. ukulelegeek

    ukulelegeek Active Member

    Joined:
    Jan 2, 2022
    157
    109
    0
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Three
    Yes, I did, with an orbital thingy, until my hands wore out and all the fog was gone.
     
    ASRDogman likes this.