1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rosen + Prius III Questions

Discussion in 'Gen 3 Prius Audio and Electronics' started by mkhan01, Jan 29, 2011.

  1. mkhan01

    mkhan01 New Member

    Joined:
    Jan 26, 2011
    11
    1
    2
    Location:
    pville tx
    Vehicle:
    2010 Prius
    Model:
    Three
    couple of questions regarding Rosen Nav HU + 2010 Prius III:

    1. Regarding JBL harness.. do you use part #: DPTYJBL1 or DPTYJBL2?

    2. Do the Prius III bluetooth/handfree steering wheel controls work w/ Rosen?

    3. Does the backup camera engage on reverse or does it have to be manually engaged?

    Thanks

    MoeK
     
    #1 mkhan01, Jan 29, 2011
  2. PaJa

    PaJa Senior member

    Joined:
    Sep 3, 2009
    678
    113
    92
    Location:
    Czech republic
    Vehicle:
    2017 Prius
    Model:
    N/A
    1. I dont know.
    2. No
    3. Yes
     
    #2 PaJa, Jan 31, 2011
    1 person likes this.
  3. mkhan01

    mkhan01 New Member

    Joined:
    Jan 26, 2011
    11
    1
    2
    Location:
    pville tx
    Vehicle:
    2010 Prius
    Model:
    Three
    Thanks, I completed putting in the Rosen, here is what I learned:

    1. JBL Harness: DPTYJBL1.
    2. Bluetooth controls: 2/3 work (answer (off hook), and hangup (on hook) work; multi function doesnt work b/c there is no voice activated bluetooth).
    3. Reverse does indeed work as long as reverse wire is wired and configured to auto-engage in Rosen settings.
     
    #3 mkhan01, Feb 26, 2011
  4. tkoo

    tkoo Junior Member

    Joined:
    Apr 3, 2011
    10
    1
    0
    Location:
    Schaumburg, IL
    Vehicle:
    2011 Prius
    Model:
    Two
    Question, I just wired my backup cam and rosen unit. Where am I supposed to wire the reverse wire to?

    I wired the power from the camera to the reverse light and know that the camera works because I can enter it manually only while in reverse, but the unit will not automatically go into the camera mode.

    Am I supposed to route the blue "Reverse" wire on the back of the rosen somewhere?

    Any help is appreciated. Thanks in advance.
     
    #4 tkoo, Jun 25, 2011
  5. rrolff

    rrolff Prius Surgeon

    Joined:
    Aug 19, 2009
    1,610
    246
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    III
    You could start by searching backup camera - many have done it - and it's probably in these forums 20+ times.

    You can get it under the dash - but I never was clear where - or at the reverse light in the back drivers light assembly (you use a Radio Shack "T" wire tap - small size) - you then run the wire from there up front (along with the camera output wire(s).
     
    #5 rrolff, Jun 25, 2011
(You must log in or sign up to post here.)