1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Parallel setup with Lithium LIPo or other Lithium battery ?

Discussion in 'Prius PHEV Plug-In Modifications' started by LexusCT200h, May 25, 2011.

  1. LexusCT200h

    LexusCT200h New Member

    Joined:
    May 24, 2011
    3
    0
    0
    was wondering if its possible to use Lithium Battery with a BMS setup to connect parallel to the Lexus CT200h to extend its range ?

    newbie here, read some threads and seems like its possible.

    Anyone tried it with their Prius ?

    thanks
     
    #1 LexusCT200h, May 25, 2011
  2. LexusCT200h

    LexusCT200h New Member

    Joined:
    May 24, 2011
    3
    0
    0
    Found references to using existing Prius NIMH with BMS+ or BMP plus management.

    is it possible to run BMS+ with a non plugin setup ie connect parallel with existing OEM battery pack + ICE to recharge ?

    any thread with a parts list ?

    thanks
     
    #2 LexusCT200h, May 25, 2011
  3. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,871
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    My understanding, is that NiMH and LiON charge very differently, so you would need separate chargers.
     
    #3 JimboPalmer, May 25, 2011
  4. qbee42

    qbee42 My other car is a boat

    Joined:
    Mar 2, 2006
    18,058
    3,075
    7
    Location:
    Northern Michigan
    Vehicle:
    2006 Prius
    They also have differing discharge curves, so you would need a buffer between the battery packs during operation. Essentially, you would need another inverter.

    Tom
     
    #4 qbee42, May 25, 2011
  5. Flaninacupboard

    Flaninacupboard Senior Member

    Joined:
    Apr 25, 2010
    1,297
    213
    0
    Location:
    Midlands - UK
    Vehicle:
    2010 Prius
    Model:
    N/A
    www.enginer.us will sell you a unit for the lexus, i'm sure. Electrically it's all sorted, but you would need to figure out where to mount it since i don't think the cargo area is the same shape/size as the prius.
     
    #5 Flaninacupboard, May 25, 2011
  6. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    Replacing the OEM battery assembly with a compatible A123 batt assembly and a BMS+ will not make you gain a lot of energy for a $$$ trade-off.
    If you want to go the A123 route, you will have to go BIGGER in capacity and externally plug-in for the best results.
    This set-up has been done and test proven already. NOT cheap tough.
    Are you NY'er?
     
    #6 mrbigh, May 26, 2011
  7. 200Volts

    200Volts Member

    Joined:
    Nov 19, 2004
    429
    43
    1
    Location:
    Northern CA
    Vehicle:
    2006 Prius
    Model:
    N/A
    FYI, In my experience the ThunderSky batteries get 95% of the performance of the A123 cells, at about half the cost.
    IMO-only use 1 type of battery, or you're going to have to build 2 BMS + buffer which in no way that I know could be cheaper, or have better performance.
     
    #7 200Volts, May 26, 2011
  8. LexusCT200h

    LexusCT200h New Member

    Joined:
    May 24, 2011
    3
    0
    0
    got a reply from BMS Plus designer and he says no support other than for Prius at the moment.

    I'm not an electronics guy so got to put this on cold storage until someone more inclined tries it.

    but looking at the BMS prius setup should be viable with a Prius NiMH batteries. just need some wiring diagrams for the ECU setup.
     
    #8 LexusCT200h, Jun 2, 2011
(You must log in or sign up to post here.)