1. Attachments are working again! Check out this thread for more details and to report any other bugs.

ICE in Reverse?

Discussion in 'Gen 3 Prius Technical Discussion' started by pictone, May 15, 2011.

  1. pictone

    pictone Junior Member

    Joined:
    Apr 1, 2011
    41
    4
    0
    Location:
    Atlanta
    Vehicle:
    2011 Prius
    Model:
    Three
    Why does the ICE start up every time I power on the vehicle and use reverse to back out of a parking space? This happens even with AC, fan and audio turned off. It comes on during the reverse process and then remains on until I come to the next full stop, even though I do not go over 10mph the whole time. Seems like a waste.
     
  2. sipnfuel

    sipnfuel New Member

    Joined:
    Jan 21, 2011
    1,080
    174
    0
    Location:
    So. Cal.
    Vehicle:
    2010 Prius
    Model:
    II
    The ICE turns on to warm itself up. This happens whether you want it to or not, unless you hit the EV button and EV mode is available.

    EV mode won't be available dependent on some conditions such as if the ICE is below a certain temperature, the HV battery is above a certain temperature, the heat is on, etc. In that situation, the ICE will always start regardless of your preference.
     
  3. jdenenberg

    jdenenberg EE Professor

    Joined:
    Nov 21, 2005
    3,872
    1,871
    1
    Location:
    Trumbull, CT
    Vehicle:
    2020 Prius
    Model:
    LE AWD-e
    The ICE is used to generate electric power using one of the MGs to drive the other MG in reverse. Your Prius is a serial hybrid when going backwards.

    JeffD
     
  4. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    Mine doesn't. The only time that the engine runs when I am in reverse is when it is warming up. Otherwise reverse is electric only. It is my understanding is that this is how it is designed.
     
  5. pictone

    pictone Junior Member

    Joined:
    Apr 1, 2011
    41
    4
    0
    Location:
    Atlanta
    Vehicle:
    2011 Prius
    Model:
    Three
    Thanks for the education!
     
  6. mikewithaprius

    mikewithaprius New Member

    Joined:
    Jan 5, 2011
    656
    103
    6
    Location:
    Rhode Island
    Vehicle:
    2007 Prius
    Model:
    N/A
    Yeah, I agree with Corwyn. When you're in reverse, MG2 (the main electric motor) moves the car. If the ICE is on when reversing, it's usually because you just turned on the car, so the car runs the ICE to warm up everything up, assuming you'll continue your voyage longer than a few seconds. The ICE does not at all power the car in this case.

    That's why if I have to move the car to the driveway, I throw it in neutral the second the "ready" light pops up, and a few nice gravity-aided swoops later, I'm parked in a new location without the engine having to turn on. Now moving it out of the driveway is another matter...
     
  7. qbee42

    qbee42 My other car is a boat

    Joined:
    Mar 2, 2006
    18,058
    3,075
    7
    Location:
    Northern Michigan
    Vehicle:
    2006 Prius
    This depends on how far you need to back up, and how much charge you have in the HV battery. If the HV battery SOC is high enough, the Prius won't start the ICE unless it does so for heat. However, once the SOC gets low the ICE comes on to supply power. In this case it is indeed a serial hybrid.

    Backing up, the serial hybrid mode of the Prius is not very efficient. Since the torque split through the PSD is fixed, the ICE tries to move the car forward while MG2 moves it backward. MG2 wins, but it's not very elegant. Fortunately, backing is not a common form of travel.

    Tom
     
  8. DaveLevenson

    DaveLevenson Junior Member

    Joined:
    Jan 30, 2011
    14
    1
    0
    Location:
    NJ
    Vehicle:
    2008 Prius
    Model:
    N/A
    It is my understanding that when the hybrid system is turned on, the ICE runs as soon as the coolant has been pumped from the thermos into the engine, for as long as it takes to bring the catalytic converter up to operating temperature. Backing up is often the first maneuver of a trip, so it appears to start when backing up. It starts at about the same time after power-up, even if the car is moving forward, or if it's not yet moving at all.
     
  9. tomlouie

    tomlouie Member

    Joined:
    Mar 26, 2011
    118
    21
    0
    Location:
    Boston, MA, USA
    Vehicle:
    2010 Prius
    Model:
    II
    If you back into your parking spot at the end of your trip, you'll avoid the need to back out at the beginning of your next trip. It's a double win:

    1. the warmed up car is more fuel-efficient backing up than the cold car,
    2. less likely to get in a collision backing into a spot than backing out of a spot.
     
  10. adamace1

    adamace1 Senior Member

    Joined:
    Jun 22, 2009
    1,403
    192
    0
    Location:
    Charlotte, NC
    Vehicle:
    2010 Prius
    Model:
    II
    it's for emmisions, it tries to warm itself up before you take off onto the roadway. It's preventing a cold ICE start when someone may leave their driveway and have to start going 50mph on a cold ICE.
     
  11. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,985
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    The -correct- answer is buried up there in all those messages. ;)

    First, it's a GIII so no pumping of coolant.
    Whether the A/C system is demanding heat or not and whether the ICE is warm or not, AND whether the cat is warm or not, the ICE will run to warm up the cat, for a minimum of about 20 sec. EVERY TIME you shut down the car (go from "ready" to off) and start back up (put the car in "ready").
    Yup, it could be considered "a waste". But it's required to meet the EPA rating Prius has earned.

    So just tell yourself "It's all good!" :)
     
  12. cobradb

    cobradb Member

    Joined:
    Mar 27, 2010
    105
    7
    4
    Location:
    tn
    Vehicle:
    2010 Prius
    Model:
    III
    i seem to remember that the ICE has to reach 100 deg F before it shuts down.
    mine also want to run for abt one mile after i start it up from a short stop.
     
  13. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,985
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    Don't see that. It's timed or cat. sensor defined, not temperature of the ICE. Pearl shuts off the ICE even if the ICE is still at 45C or lower, for example.

    Also note that the car is rather "limp" for about a minute, perhaps less, from a cold start. This to keep the ICE from running at power to keep emissions down while cold. I suspect this is why many reviewers think the Prius is gutless. It isn't, it just has certain "different" operating methods, such as a slight delay when you floor it. It WILL "scat" very well. I often leave traffic behind at lights.
     
  14. spiderman

    spiderman wretched

    Joined:
    Jul 5, 2009
    7,543
    1,558
    0
    Location:
    Alaska
    Vehicle:
    2010 Prius
    Model:
    II
    FWIW, I see with my SG that the engine will shutdown, if it can, @ 103 degrees every time in ECO mode.
     
  15. Codemonkey812

    Codemonkey812 Junior Member

    Joined:
    Mar 8, 2011
    22
    0
    0
    Location:
    Kent, Ohio
    Vehicle:
    2013 Prius
    Model:
    Persona
    Picking up on an old thread but, I wish this was something better explained to new Prius owners. I almost got stuck in a driveway with a very steep grade, when I had to back out of it. I did not realize the ICE cannot assist in backing up. I had to wait for the battery to charge and the ICE to shut down before I could back out.