GPS Voice stopped working

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by jjgotmail, Apr 27, 2011.

  1. jjgotmail

    jjgotmail New Member

    Joined:
    Jul 3, 2009
    3
    0
    0
    Location:
    new jersey
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Hello,

    I have a 2010 Gen III Prius with Nav(GPS).

    I use the builit in GPS all the time. Yesterday I set my destination though and realized that that the voice had stopped (or never started) giving me directions for the trip. Not even any bells indicating a turn was coming. I verified the NAV Voice volume settings were fine, bluetooth for phone was working, and radio played. I deleted the destination and chose another destination. Nothing I tried could get the voice to start again. When I arrived at my destination I shut the car off and started the engine again. I set a destination and the voice worked fine.

    Any ideas as to what this could be? I'm at 35,500 miles and will be running to the dealer with this.

    Thanks,
    The Edge
     
    #1 jjgotmail, Apr 27, 2011
  2. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    You probably muted the NAV by mistake. It reset when you restarted the car.
     
    #2 firepa63, Apr 27, 2011
  3. jjgotmail

    jjgotmail New Member

    Joined:
    Jul 3, 2009
    3
    0
    0
    Location:
    new jersey
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A

    How do you mute the NAV?
     
    #3 jjgotmail, Apr 27, 2011
  4. indyV

    indyV Junior Member

    Joined:
    Oct 12, 2010
    58
    15
    12
    Location:
    NorCal
    Vehicle:
    2010 Prius
    Model:
    V
    When you entered your destination, did you hit the "OK" button? Usually after that, the voice chimes in and tells you to proceed to the highlighted route.
     
    #4 indyV, May 1, 2011
(You must log in or sign up to post here.)