1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Front passenger cup holder

Discussion in 'Gen 3 Prius Main Forum' started by dbcassidy, Mar 10, 2011.

  1. dbcassidy

    dbcassidy Toyota Hybrid Nation, 8 Million Strong

    Joined:
    May 13, 2008
    1,581
    290
    3
    Location:
    Middlesex County, MA
    Vehicle:
    2008 Prius
    Model:
    Two
    I am currently driving a 2010 Prius and I am having a problem w/ the passenger cup holder. It doesn't want to hold either a cup or can in the upright position (contents spill) I reviewed the owners' manual, it didn't offer any solutions. Am I missing something? Is there an aftermarket accessory or solution I could look into?

    Any help, advice would be helpful.

    Thank you,

    DBCassidy
     
  2. BrettS

    BrettS Active Member

    Joined:
    Jan 18, 2011
    290
    136
    0
    Location:
    Orlando
    Vehicle:
    2010 Prius
    Model:
    III
    Which cup holder are you referring to? The two in the center console are in line with each other, so I'm not sure which would be the passenger cup holder (although I haven't had any issues with cups spilling in either of them). The ones in the passenger and drivers doors are only for bottles and not cups or cans... if you're trying to put a cup or a can in the door then that might be part of the problem.
     
  3. eglmainz

    eglmainz New Member

    Joined:
    Jan 21, 2009
    887
    141
    0
    Location:
    Chicagoland, IL
    Vehicle:
    2010 Prius
    Model:
    V
    Yes, please confirm with of the passenger cup holders you are referring to? There are at least 5 spaces a passenger could use as a cup holder. There are two between the front seats, one the passenger door (the one in the driver door I am not including, as that is the only one I would term 'drivers' cup holder, otherwise there would be 6 in the car), and they have two in the rear for the rear-seat passengers (or long armed from seat passengers.

    I've used all of them without issue, as have my kids, on many bumpy roads and 'sporadic' stops and go's without issue.
     
  4. nwprius

    nwprius Member

    Joined:
    Feb 26, 2004
    227
    35
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    N/A
    I put in a piece of grey inch wide three eights thick self adhesive insulation foam that made the cups I use fit snugly.
     
  5. samsprius1

    samsprius1 Active Member

    Joined:
    Jul 19, 2008
    716
    176
    0
    Location:
    USA
    Vehicle:
    2023 Prius
    Model:
    Limited AWD-e
    The one in the doors are great for a bottle of water but thats about it!
    If you look real close at the door panel it has a stamped bottles only
    no cups!
    the cup holders for the center console are just ok! the one with the flip door I use, and the passenger(my wife) uses the one behind it when you slide the armrest back. One on each end of the dash like the Yaris would be nice.
     
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    two more in the middle of the massive wasted bridge space would be perfect.
     
  7. dbcassidy

    dbcassidy Toyota Hybrid Nation, 8 Million Strong

    Joined:
    May 13, 2008
    1,581
    290
    3
    Location:
    Middlesex County, MA
    Vehicle:
    2008 Prius
    Model:
    Two
    So Sorry for not being more detailed in my post. I meant the center console, rear (arm rest) slider area. There seems to be no cup or can restraintin place. Its' like putting a cup or can in the storage area (under the arm rest) and hoping nothing spills or tips over going thru a curve.

    Hopes this helps,

    DBCassidy
     
  8. Teakwood

    Teakwood Member

    Joined:
    Jun 23, 2010
    491
    73
    0
    Location:
    New Mexico
    Vehicle:
    2010 Prius
    Model:
    II
    I do not know what you are doing, but I find it holds cups and cans just fine, as long as you have the liner in place.
    :confused:
    You do have the liners in the holders, don't you?
     
  9. samsprius1

    samsprius1 Active Member

    Joined:
    Jul 19, 2008
    716
    176
    0
    Location:
    USA
    Vehicle:
    2023 Prius
    Model:
    Limited AWD-e
    If your a coffee drinker this is what I use! Also works well with your favorite cold beverage too. order two! Won't spill all over.

    Copco - Eco-First - Acadia Mug Brown

    amazons got em 5.99 go there for reviews.
     
  10. twittel

    twittel Senior Member

    Joined:
    Jul 7, 2010
    1,605
    148
    0
    Location:
    Mt. Pleasant, SC
    Vehicle:
    2010 Prius
    Model:
    III
    The passenger cup holder in the bottom of the passenger door is designed to hold the plastic water bottle with cap on. It will not hold cans and cups. At least this is what I read in the owner's manual.
     
  11. itssunnyv

    itssunnyv New Member

    Joined:
    Jan 30, 2011
    33
    3
    0
    Location:
    Studio City, CA
    Vehicle:
    2011 Prius
    Model:
    II
  12. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,797
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Sounds like it's missing the "rear console box pocket", which I would normally call the "cup holder."

    View attachment 28766
     
  13. Joe166

    Joe166 New Member

    Joined:
    Dec 19, 2009
    720
    96
    0
    Location:
    South Florida
    Vehicle:
    Other Hybrid
    Model:
    V
    If they called it a "cup holder" everyone would know what the heck they were talking about. That would take all the fun out of it for the manual writers.
     
  14. ahope577

    ahope577 Junior Member

    Joined:
    Feb 19, 2011
    5
    0
    0
    Location:
    Somerset
    Vehicle:
    2010 Prius
    Model:
    III
    There is a removable plastic holder that should be present in this area - it is removable so it can be cleaned but it sounds like it is missing in your vehicle...
     
  15. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i think you're missing the cupholder itself, er, rear console box pocket.
     
  16. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,797
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Y'know, I think I'm going to start a band called "Rear Console Box Pocket." Has a certain ring to it, doncha think?
     
  17. billinmd

    billinmd Member

    Joined:
    Feb 27, 2011
    184
    28
    0
    Location:
    Bel Air, MD
    Vehicle:
    2020 Prius Prime
    Model:
    Limited
    Do you have the cup holder in place? Mine is pretty snug and does just fine. Try and reseat it to make sure it is snapped in correctly.
     
  18. Gurple42

    Gurple42 New Member

    Joined:
    Mar 10, 2011
    354
    41
    3
    Location:
    Santa Monica, Ca.
    Vehicle:
    2011 Prius
    Model:
    Two
    I assume Groucho, not Karl
     
  19. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i like it! are you sure it's not taken? sounds familiar.:rolleyes:
     
  20. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    imagine if they took the huge area below the shifter (where the current single cupholder is) and created a beautiful storage area with two cupholders and change holder etc. that would be brilliant! oh wait, it's toyota. only brilliant engineering, not interior design.