1. Attachments are working again! Check out this thread for more details and to report any other bugs.

lag time between systems when starting Prius

Discussion in 'Gen 2 Prius Main Forum' started by lizmariecat, Feb 11, 2011.

  1. lizmariecat

    lizmariecat New Member

    Joined:
    Oct 2, 2010
    11
    1
    0
    Location:
    AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    :( Hi. I'm seating in my 2008 Prius (new to me and at about 45k miles) and when I have foot on brake and push starter button my screen lights up, dash indicators etc, but there is a very long lag time (or so it seems) betwwen my silent start and when gas engine kicks. The car will not go into anything other than neytral until the second engine kicks in....and there I sit. It does comes on but it's a good 30-60 seconds....a little weird? Anybody have an experience like this? Thanks!
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    never. i have 'ready' in less than a second. what do you mean by second engine kicks in?
     
  3. lizmariecat

    lizmariecat New Member

    Joined:
    Oct 2, 2010
    11
    1
    0
    Location:
    AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    now you see why I'm a junior member...ha ha. Well first everything is totally silent and dash lights on but 'ready' doesn't display right away...and there is that lag time until I hear a motor (maybe not a second motor--sorry;).
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how long have you had it, has something changed?
     
  5. lizmariecat

    lizmariecat New Member

    Joined:
    Oct 2, 2010
    11
    1
    0
    Location:
    AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    about 6 weeks--always a bit of a lag time, does seem a little more lately. Guess a dealer visit in my near future,eh?
     
  6. 2k1Toaster

    2k1Toaster Brand New Prius Batteries

    Joined:
    Feb 14, 2010
    6,035
    3,855
    0
    Location:
    Rocky Mountains
    Vehicle:
    2006 Prius
    Model:
    Three
    I am not sure what you are even describing...

    Car is OFF. No lights, nothing.
    Press the brake pedal.
    Press the Start button.
    Hear 1 click - current limiting startup relay for the HV battery
    Hear 2nd click - regular HV relay (1st relay also disconnects with a click but very shortly afterwards)
    Car is now READY.
    Shift into D/R.
    No matter what "gear" you are in (P/R/D/B ), the gas engine (ICE) will start at most 7 seconds after READY. However, the car is fully drivable before this. If your battery charge is low, the engine will kick on sooner. Same with if the HVAC settings require it.

    If this is not happening, then take a video of the start sequence and post it.
     
  7. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it could be that you don't understand how a hybrid works. however, when you put your foot on the brake and press power, the ready light should come on within a few seconds and you should be able to shift into drive and go, regardless of when the engine kicks on. the engine is independent of the drive system in terms of whether it is running or not. if you cannot shift into drive until much longer than a few seconds, a trip to the dealer is just what the car doctor ordered. all the best!
     
  8. qbee42

    qbee42 My other car is a boat

    Joined:
    Mar 2, 2006
    18,058
    3,075
    7
    Location:
    Northern Michigan
    Vehicle:
    2006 Prius
    You don't need to wait for the engine to start. After power up, there is about a two-second wait for the car to be "Ready", at which point you can shift into D or R and drive away. The engine will turn on later when it needs to.

    Tom
     
  9. lextoy

    lextoy Active Member

    Joined:
    Apr 22, 2010
    291
    131
    0
    Location:
    philadelphia
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Premium
    make sure you are not stabbing the start button too quickly,
    press it and hold it for 1 second.
    if you stab it too quick it can confuse the car.
     
  10. uart

    uart Senior Member

    Joined:
    Sep 7, 2009
    4,215
    1,202
    0
    Location:
    Australia
    Vehicle:
    2005 Prius
    As mentioned above try holding your foot on the brake (firmly) and holding the start button for one second (or even 1/2 a second is ok but don't just "stab" it).. Then keep your foot on the brake and wait 2 to 3 seconds before you try to put it into "D" (or "R" as the case may be). It should go straight in, but do wait for that couple of seconds until you hear the "ready" beep before you try to shift into gear and keep your foot on the brake.
     
  11. V8Cobrakid

    V8Cobrakid Green Handyman

    Joined:
    Jun 6, 2004
    3,790
    152
    0
    Location:
    Park View, Los Angeles, CA. U.S.A
    Vehicle:
    2004 Prius
    Model:
    N/A
    wow.. a true newbie.. how exciting

    as people have mentioned.. and ill repeat just to beat this dead horse (where did that icon go anyway...) (i'll skip it... don't care to reach for the mouse...)

    driving a prius 101:

    jump in.. press break.. press start button.

    dash says "ready"

    u: Go

    Prius: starts out on electricity

    u: where's the gas engine.. did i break it?...

    Prius: decided a warm-up cycle is needed, and starts up the Internal Combustion Engine.. or ICE for short... (motor refers to the electric motors)

    u: this prius engine finally kicked on (u should be driving at this point)

    Prius: reduces load on the ICE so it can warm up without any real pressure or load on it... runs ICE a little higher to keep electric feedback high... or to keep battery State of Charge or SOC for short topped off (which is only really ~%80) (it will drop... should drop every warmup cycle.. will go back up too)

    u: stopping at the nearest stop light.. over 30 seconds away or so.. and over 10 mph or so in speed to get there. (i've seen different data on this)

    Prius: gas engine warmed, check. speed achieved, check. break pedal fully depressed at this stop light or sign, check... i'll switch the ICE out of warmup cycle, and shut it off. i'll also re instate the ICE's carrying load and work on filling the battery back up to 6 bars.

    u: depending on if you're sitting in the garage still:
    about time this thing works
    or
    cool, the warmup cycle is done, and i NEVER have to sit around and wait for it since my car is better than that...


    one of the joys of owning this car is the joy of walking to your car the same time as everyone else.. but jumping in your car and driving off instantly without causing damage as it's designed to handle itself and it's warmup, charge, cooling, and any other cycle you can possibly think of. the rest of this car is just as smart..

    it's smarter and stronger than you think... i've tested it.. it way too many ways (specially durability of the drivetrain and chassis)
     
    1 person likes this.
  12. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    where you at, lizmariecat? did u go 2 the dealer? how are you making out?
     
  13. richard schumacher

    richard schumacher shortbus driver

    Joined:
    Mar 27, 2004
    7,663
    1,041
    0
    Location:
    United States
    Vehicle:
    2004 Prius
    Model:
    N/A
    Wait, what? You mean it takes 30-60 seconds before the "READY" light comes on? If so then that requires a trip to a dealer, because something is wrong.

    As soon as the READY light is on you can drive. You do not have to wait for the engine to start.

    If you do not have a copy of the Owner's Manual for the correct year then buy a copy from a dealer. It's full of info that you need to know.