1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2008 Prius stereo removal for DICE install - help!

Discussion in 'Gen 2 Prius Audio and Electronics' started by keytohwy, Apr 17, 2008.

  1. keytohwy

    keytohwy New Member

    Joined:
    Feb 11, 2008
    11
    0
    0
    Location:
    Martinez, CA
    Vehicle:
    2008 Prius
    OK, not a dumb guy, but the instructions for installing the DICE Silverline are minimal. I guess I'm looking for a place to begin. How to take out/get to the back of the current stereo. I have a basic package, no NAV, SAT, etc.

    Thanks for any help or links to help!
     
    #1 keytohwy, Apr 17, 2008
  2. GeoGeek

    GeoGeek Member

    Joined:
    Mar 2, 2006
    360
    31
    0
    Location:
    Auburndale, FL
    Vehicle:
    2010 Prius
    Model:
    IV
    Here's an "oldie but a goodie"...Chris Dragon's instructions for radio removal.
    Several folks here on PC have written other instructions for how to install without pulling the dash apart so completely (like maybe just the vent panel to the right of the radio)...but if you want to get the radio out and get to the back....this is the best instruction I'm aware of.
    Good Luck!
     

    Attached Files:

    #2 GeoGeek, Apr 17, 2008
    1 person likes this.
  3. keytohwy

    keytohwy New Member

    Joined:
    Feb 11, 2008
    11
    0
    0
    Location:
    Martinez, CA
    Vehicle:
    2008 Prius
    Thank you! I wonder how different a 2008 is? Will find out this weekend...

    If anyone else has tips before I pull everything apart, please let me know.

    Thanks again,
    keytohwy
    (with a two day-old Prius)
     
    #3 keytohwy, Apr 17, 2008
  4. LouisLacrosse

    LouisLacrosse New Member

    Joined:
    Apr 19, 2008
    1
    0
    0
    Vehicle:
    2008 Prius
    I also have the 2008 package # 1. I was looking into getting the new DICE silverline.

    Have you installed it yet? Is it tedious?

    & does it work well?



    Thanks,
    Louis
     
    #4 LouisLacrosse, Apr 19, 2008
  5. exbauer

    exbauer Active Member

    Joined:
    Aug 16, 2006
    1,185
    101
    0
    Location:
    Washington
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    those directions are spot on. i used them today to install my xm. it isn't very hard, but time consuming. but, rather do it right the first time around.
     
    #5 exbauer, Apr 19, 2008
  6. pfmanny

    pfmanny New Member

    Joined:
    Mar 30, 2008
    9
    4
    0
    Location:
    Indianapolis, IN
    Vehicle:
    2012 Prius
    Model:
    II
    Hey everyone I have made a post titled radio removal with tips and pictures check it out! PFMANNY:D
     
    #6 pfmanny, Apr 24, 2008
  7. keytohwy

    keytohwy New Member

    Joined:
    Feb 11, 2008
    11
    0
    0
    Location:
    Martinez, CA
    Vehicle:
    2008 Prius
    I ended up using another set of instructions that only involve removing the vent cover that is right center. If you have all the parts you need (I didn't), it should take about 30 mins.

    I installed the Silverline to use with an iPhone. I also used the Bracketron holder instead of the ProClip system that DICE sells.

    The UI for the Silverline is a little clunky, but it works very well with my iPhone. Unlike what some others reported, my music pauses when the car is turned off, without having to first power down the stereo.

    See the last post on page 3, and then forward from there.

    http://priuschat.com/forums/audio-electronics/39169-iphone-mounting-options-what-s-best-3.html

    Let me know if you have any questions,
    keytohwy

     
    #7 keytohwy, Apr 25, 2008
  8. nomis_nehc

    nomis_nehc New Member

    Joined:
    Feb 1, 2010
    2
    0
    0
    Location:
    Irvine, CA
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    sorry to revive an old thread, but can you point me to the other instructions you used? I will be doing this for my gf this weekend. Thanks!
     
    #8 nomis_nehc, Feb 9, 2010
  9. tom28734

    tom28734 Junior Member

    Joined:
    Jan 20, 2011
    4
    0
    0
    Location:
    NC
    Vehicle:
    2009 Prius
    Model:
    Five
    I used the Chris Dragon instructions to remove my stereo and then removed a jammed disc from the changer. These instructions are perfect; all went well. I'm inexperienced in all of this and encountered no problems. THANKS to this forum and Chris Dragon for the help.

    I did have to really yank on a few of the dash pieces to get the clips to release. (If it's cold where your car is, put a small electric heater inside for a few hours to soften the plastics.)

    The top of the radio was easily removed after the bracket was taken off. The jammed CD was easily seen, but the opening is not large enough for the CD to be removed intact. I just released the CD from the player arm with my fingernails and then broke the CD for removal. I then tested the changer quite a bit before re-assembly. No problems.

    One more thing - the CD changer was jammed on a commercial CD with a fairly thich paper label. NEVER put a CD with paper label in an automotive changer. The changer is weak and any friction can jam it. (The CD was in there when I bought the car!)

    Thanks again!
     
    #9 tom28734, Jan 20, 2011
(You must log in or sign up to post here.)