The local Toyota dealer SERVCO Pacific out here in Hawaii uses/adds Krex brand graphite lubricant to all vehicles serviced at their dealerships and to all new vehicles imported in to the Islands at their dealer preperation center. I don't think that it will hurt anything, my wife's 2005 Tacoma has been serviced by them sence new and has recived Krex at each service it has 113,xxx miles on it. Here is a link to the Krex site, KrexInc.com My Prius is new and has had this lubricant in the oil so unless I change the oil, I guess we shall see. I was just wanted to solicit others thoughts about this product and its usage.
Don't bother and just send me $20 instead The gen3 2010 Prius uses a special (and expensive) 0w20 oil for best performance, engine longevity and extended service intervals. Why waste extra money on something that is not recommended by the manufacturer and therefore not required?
That's not much of a recommendation... Especially since you are already paying top dollar for 0W-20 synthetic oil, can you decline the additive when an oil change is performed?
That was a statement rather than a recommendation. I do not or am not recommending this lubricant just want to seek out more information regarding it's usage. Yes you can decline having the Krex added. I was just wondering if anyone knew the if there were any pro's or con's to using this graphite lubricant. I was mainly concerned with any harmful side effects. But unless you do opt out which I would guess most people do not every dealer serviced Toyota in the state has this added to the oil. I agree that it is probably not needed and just another way for the dealership to profit, but right now it is in my cars engine. I just read my owners manual yesterday and DIY oil and filter change instructions are not listed. Does that mean Toyota would rather me not do my own oil changes and preventative and scheduled maintenance?
I read their ad, seems strange that they are claiming that engine oil can go to 1350 degrees, I track race my Vette and when the oil temp gauge goes to 300 it's time to shut it down (never does), the real problem is the lack of info on the Toyota can , I ask the dealer if it was GF4 or GF5, GF 5 is the new standard for 2010 and in fact it does contain graphite and moly and it is a big step forward from the the now old gf4 oil. One of the biggest problems for the lab people when designing the graphite and moly was to get it to work as the moly was a problem with the timing chains, so in my book this is snake oil