We are looking for the connector that goes on the coolant sensor on the bottom of the canister. (See pic) [IMGLINK]http://mt4ima.blu.livefilestore.com/y1pbNEMA8i8NLAR7XihBlTIFHQOklpIBt0pJO5-nzN5W0_Oaemi4IgoCZYbktg18wZn13EjDGIzt5SPJ3kyVvvlcTxjCmCyTuEd/S6300171.JPG?psid=1[/IMGLINK] Do you happen to know where we can buy one? We are unable to find the part #, even after going to our dealership. Thanks for your consideration. -Ed
I think this may be the part number. Not 100% sure. If you need pins for it they have a part number also. If you give me a few hours I can hunt every thing down. ( I currently need to finish a project ) If someone else has the correct numbers go ahead and post. 90980–11061
Please verify. It is a female weather proof connector. Female plug. Part number for the plug. 90980-11061 Part number for the weather proof pins. 82998-12620 The connector is about 9$ and it looks like the pins are either expensive at about $19 each or you get multiple pins. Cant really find out as the descriptions on the net don't say. Check with your dealer.
I purchased these from Olathe Toyota. They looked up the part # for me & ordered it. The pins are a problem. I have a cheap souce for the pins. I used Molex Part # 0194200010 They are available from Digikey at Digi-Key - WM17427-ND (Manufacturer - 19420-0010) and work OK, though they are not a perfect fit. I used them when I rebuilt my car 2 years ago. I also have an extra connector lying around, which I would have to check, looks like the correct one, and lots of pins. Let me know if you need them.
How much do you want for the connector with shipping and how soon could you ship it? Thanks for ALL the help. Ed extra connector lying around
Yes, I can verify that it is the weather proof female plug connector and that this looks like the part we need. Where can I buy one? Cheers, Ed
I believe I have one that I can cut from a salvage car. Call me M-F 8-5 mountain time. Eric Adopt A Part 800-508-2211
