1. Attachments are working again! Check out this thread for more details and to report any other bugs.

04 won't start - red car on MFD

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Daox, Apr 28, 2010.

Page 2 of 2
  1. vertex

    vertex Active Member

    Joined:
    Mar 27, 2009
    672
    143
    0
    Location:
    new york
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Plus
    Just have someone see if the brake lights come on when you press with normal pressure. The switch might just need some adjustment.
     
    #21 vertex, May 2, 2010
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Yes, any DTC logged by the engine and hybrid vehicle ECUs would be lost.

    In the meantime, I second the advice that you check when the brake lights come on. Position the car so that you can see the brake lights in your rear view mirror, then see how hard you have to depress the brake pedal to get the lights to come on.
     
    #22 Patrick Wong, May 2, 2010
  3. Daox

    Daox Member

    Joined:
    May 19, 2009
    196
    58
    0
    Location:
    US, Wisconsin
    Vehicle:
    2004 Prius
    Model:
    N/A
    I took the car for a couple drives this weekend, some short some long, no problems at all.

    I will check the brake lights. Is the switch adjustable or is this a replacement deal?
     
    #23 Daox, May 3, 2010
  4. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    The switch position is adjustable. However if you find that the switch operates intermittently, then it should be replaced.
     
    #24 Patrick Wong, May 3, 2010
  5. Daox

    Daox Member

    Joined:
    May 19, 2009
    196
    58
    0
    Location:
    US, Wisconsin
    Vehicle:
    2004 Prius
    Model:
    N/A
    Well, the same thing happened again to my wife yesterday. She drove the car home this time and its sitting in the driveway doing the same thing as before. The reset lasted ~10 days. It is definitely not a brake switch. I pushed very hard on it last night and I got nothing but the dash lit up and red car on the MFD.

    Anyone think this could be 12v related? I didn't think it was before but now I'm wondering...
     
    #25 Daox, May 12, 2010
  6. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,665
    15,663
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    There is a little discussed, Toyota diagnostic that consists of an OBD connector and two switched:
    http://priuschat.com/forums/generation-1-prius-discussion/79877-intro-dtc.html#post1116332

    It can flash the last two digits of the error codes on the instrument warning lights. Using these two-digit codes, you can look up in the maintenance manual and/or ask online to see if they match known error codes.

    Bob Wilson
     
    #26 bwilson4web, May 12, 2010
  7. ejlazarus

    ejlazarus Junior Member

    Joined:
    Jan 14, 2004
    6
    0
    0
    Location:
    Germantown, TN
    Vehicle:
    2004 Prius
    I had a similar proble,m the dealer told mw it as a defective inverter pump. That was replaced todday and all is well. So far so good 61+K miles, 04 silver.
     
    #27 ejlazarus, May 12, 2010
(You must log in or sign up to post here.)
Page 2 of 2