Hello, I've read a few posts where people say that there are additional settings on the nav to fine tune the bluetooth sound sensitivity and some other settings. I"m not able to find these setting, can someone tell me where they are? I have a Motorola v551 and overall it works great. The only problem I have is when I make calls directly from the phone. The call is made and the receiver picks up but it takes around 4 seconds for it to switch to speakerphone. Sometimes they hang up before I can say hello. I'm looking for a way to adjust this. thanks
Fern, The settings adjustment is in the hidden diagnostics menu. It is accessed by holding down the [strike:b3d4d8330f]ODO[/strike:b3d4d8330f] (edit: INFO) button and turning the headlights on and off 3 times. But, I don't think that's going to help the pick-up delay situation you're experiencing. It just takes that long for the BT connection to transfer...and it can be annoying. If you find that you have a lot of numbers you need to dial and don't want/have them in the 1-touch dialing menu there are a couple of options. 1)Pull over and use the pad on the touch screen to dial. 2)get used to the delay 3)buy the Coastaletech nav/bt defeat 4)install your own BT defeat switch--check the archives and knowledge base if you wish to explore that option
So I tried this and for some reason, it does not work for me. I did the following 1) turned on the car and made sure the ODO was on the total mileage setting. (Not mil A or B) 2) I turned off the car 3) Held the brake down and turned on the car 4) Pressed the ODO button 5) Turned the headlights on and off 3 times ...nothing thanks in advance
<div class='quotetop'>QUOTE(fern\";p=\"109597)</div> It should be the INFO button, or the DISP button, not ODO.
An alternate means to get to the diagnostics is press display button (don't hold down), then touch the top left/bottom left of the screen 3 times (much like the NAV speed override recently discovered) below/above the banners the display button put up.
