Install Relay Harness for HID conversion?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by ajc, Feb 18, 2010.

  1. ajc

    ajc Member

    Joined:
    Aug 11, 2009
    340
    38
    0
    Location:
    pa
    Vehicle:
    2010 Prius
    Model:
    III
    I just received my HID digital kit with a Relay Harness + 50W resisters. Do I have to use the Harness on my 2010 Prius III?
     
    #1 ajc, Feb 18, 2010
  2. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    I used the relay harness on my HID kit.
     
    #2 ePrius, Feb 18, 2010
  3. ajc

    ajc Member

    Joined:
    Aug 11, 2009
    340
    38
    0
    Location:
    pa
    Vehicle:
    2010 Prius
    Model:
    III
    Did you connect the + directly to the battery or did you use the + terminal in the fuse box?
     
    #3 ajc, Feb 18, 2010
  4. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    I used the + terminal in the fuse box.
     
    #4 ePrius, Feb 18, 2010
  5. ajc

    ajc Member

    Joined:
    Aug 11, 2009
    340
    38
    0
    Location:
    pa
    Vehicle:
    2010 Prius
    Model:
    III
    Do I need the Relay Harness with the 50W Resisters?
     
    #5 ajc, Feb 18, 2010
  6. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    My relay kit came with the resistors.

    Basically for my setup, I ran the power cable (red) from the HID kit to the + fuse within the fuse box. Then I connected the my relay kit which consists of ground wire (black) and resistors to the HID kit. The ground wire (black) are held by bolts to the car frame.
     
    #6 ePrius, Feb 18, 2010
(You must log in or sign up to post here.)