1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Fuel Filler Neck

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by TopJimmy5150, Nov 30, 2009.

  1. TopJimmy5150

    TopJimmy5150 Junior Member

    Joined:
    Oct 9, 2009
    55
    1
    0
    Location:
    Gillett, PA
    Vehicle:
    2010 Prius
    Model:
    IV
    I've had my Prius IV for a month or so now. One weird thing I've noticed when I'm filling it up with gas...the fuel filler neck (the gas cap screws onto) is loose...it almost feels unattached.

    Is this normal? Sorry if this has come up before, but I did a search on Fuel Filler Neck and only came up with 2nd Generation TSBs.

    -Jay
     
    #1 TopJimmy5150, Nov 30, 2009
  2. TopJimmy5150

    TopJimmy5150 Junior Member

    Joined:
    Oct 9, 2009
    55
    1
    0
    Location:
    Gillett, PA
    Vehicle:
    2010 Prius
    Model:
    IV
    Good to know I'm not the only one. I'm wondering why it's that way.
     
    #2 TopJimmy5150, Dec 1, 2009
  3. SF Prius

    SF Prius New Member

    Joined:
    Aug 11, 2009
    12
    2
    1
    Location:
    San Francisco, CA
    Vehicle:
    2010 Prius
    Model:
    IV
    Me too... I'm always worried that the whole thing will fall apart when filling the tank and I'll have gas going all over the place!
     
    #3 SF Prius, Dec 1, 2009
  4. TopJimmy5150

    TopJimmy5150 Junior Member

    Joined:
    Oct 9, 2009
    55
    1
    0
    Location:
    Gillett, PA
    Vehicle:
    2010 Prius
    Model:
    IV
    Everyone has to get fuel once in awhile...please chime in.
     
    #4 TopJimmy5150, Dec 2, 2009
  5. adamace1

    adamace1 Senior Member

    Joined:
    Jun 22, 2009
    1,403
    192
    0
    Location:
    Charlotte, NC
    Vehicle:
    2010 Prius
    Model:
    II
    i think it may be rubber mounted. Mine feels loose when i have the gas pump handle in it.
     
    #5 adamace1, Dec 2, 2009
  6. MikeDS

    MikeDS Member

    Joined:
    Apr 29, 2007
    298
    15
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    II
    Mine is loose too...figured it was by design.
     
    #6 MikeDS, Dec 3, 2009
  7. dwhutch

    dwhutch New Member

    Joined:
    Sep 7, 2009
    41
    8
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    V
    Mine is the same way. It hasn't been a problem so far.
     
    #7 dwhutch, Dec 3, 2009
  8. krajesj52

    krajesj52 New Member

    Joined:
    Sep 8, 2009
    3
    0
    0
    Location:
    Connecticut
    Model:
    II
    I have a 2010 GenIII Type 2 and my filler neck is not loose.
     
    #8 krajesj52, Dec 9, 2009
  9. pjksr02

    pjksr02 Active Member

    Joined:
    Nov 2, 2009
    532
    225
    2
    Location:
    Connecticut
    Vehicle:
    2010 Prius
    Model:
    III
    I'd say the filler neck is "flexible," rather than "loose."

    The neck is also not totally metal. This is by design. There's a weight consideration, since a heavy, rigid, totally metal filler neck would be heavier, and require sturdy metal brackets to connect to the filler door housing. I was surprised, when the filler neck on my old Honda Prelude corroded, the new part was heavy, about 10-12 pounds! And that brings up another point: the Prius's neck will not be likely to corrode since it isn't all metal!

    It's interesting to see how Toyota designers fit the filler tube into the Prius. There isn't much room for it!
     
    #9 pjksr02, Dec 10, 2009
  10. Ledge

    Ledge Junior Member

    Joined:
    Jun 5, 2009
    33
    3
    0
    Location:
    Pueblo West, Colorado, USA
    Vehicle:
    2016 Prius
    Model:
    Two Eco
    I also have a 2010 Prius II, and my filler neck is not loose.
    Seems nice and solid.
     
    #10 Ledge, Dec 10, 2009
  11. fly navy

    fly navy Ex Jet Driver

    Joined:
    Dec 31, 2009
    1
    0
    0
    Location:
    Bellingham, Washington
    Vehicle:
    2010 Prius
    Model:
    II
    My II has less than 5,000 miles and the filler neck is rock solid. If I press real hard I can feel very slight "give" as if it has a rubber shock mount, but nothing remotely loose.
     
    #11 fly navy, Dec 31, 2009
  12. thbjr

    thbjr Member

    Joined:
    Nov 15, 2009
    326
    62
    0
    Location:
    Phoenix
    Vehicle:
    2010 Prius
    Model:
    III
    I see this is your first post.
    Welcome to the PriusChat Herd...

    Click here for details;)
     
    #12 thbjr, Jan 1, 2010
  13. danep

    danep Junior Member

    Joined:
    Dec 5, 2009
    15
    3
    0
    Location:
    San Francisco
    Vehicle:
    2010 Prius
    Model:
    III
    I think we're arguing semantics here. The neck on my 2010 Prius III definitely moves around a lot more than anything I've seen on other vehicles. You could call it loose, though I understand why some people wouldn't, since I think it has a negative connotation and implies that it's not by design.

    One thing I have noticed is that because of this flexibility, the pump handle tends to rest much closer to horizontal than I'm used to. I've noticed that this caused a lot of pumps to automatically shut off while filling, which can get REALLY annoying. Anyone else noticed this?
     
    #13 danep, Jan 29, 2010
(You must log in or sign up to post here.)