1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 - Help! Disabling Reverse Beep

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by sherryp, May 30, 2009.

  1. Bobsprius

    Bobsprius BobPrius

    Joined:
    Jul 23, 2009
    679
    80
    0
    Location:
    Buffalo
    Vehicle:
    2010 Prius
    Model:
    V

    BigCwill....I agree it should USER ADJUSTABLE, no delaer involved. I just guess I tune it out like anything else I tune out! :p
    Now if Toyota would make these USER CUSTOMIZABLE, that would be GREAT! How do we make that happen???? :noidea:
     
  2. lenjack

    lenjack Active Member

    Joined:
    Dec 1, 2006
    804
    114
    0
    Location:
    Pennsylvania USA
    Vehicle:
    2010 Prius
    Model:
    III
    Your chapter and verse is on page 587 of the manual where it specifically states that your dealer may do this. Anything else is BS.
     
    Manila Mike and Jazzman like this.
  3. Jazzman

    Jazzman New Member

    Joined:
    Oct 10, 2009
    3
    0
    0
    Location:
    Cedar Hills, UT
    Vehicle:
    2010 Prius
    Model:
    III
    SWEET!! That is exactly what I'm looking for. Thanks a ton! I assume this would fall under "Operation signals (Buzzer)". What other buzzers fall into that category?
     
  4. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    953
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    It's already happened in the Lexus via the NAV screen (2010 RX350 pictured here). If the past is any indication, it'll be a few more years before we see it in Toyotas.
     

    Attached Files:

  5. lenjack

    lenjack Active Member

    Joined:
    Dec 1, 2006
    804
    114
    0
    Location:
    Pennsylvania USA
    Vehicle:
    2010 Prius
    Model:
    III
    I wouldn't be surprised if someone finds an "Easter egg" for this.
     
  6. OliverWithPrius

    OliverWithPrius New Member

    Joined:
    Jun 30, 2009
    2
    0
    0
    Location:
    Bay Area
    Vehicle:
    2004 Prius
    Model:
    N/A
    Hmmm. Just upgraded from a 2004 Prius to the new 2010 model, and of course the first thing I wanted to do was disable the reverse beep -- just as I did with his older brother six years ago. Figured -- why read the manual when you can just google for the steps, which then brought me to this thread and the disappointment that I now have to take it back to my dealer.

    Very annoyed at Toyota for this "downgrade".

    And (slightly off-topic, but it came up in this thread before) what's with those voodoo "push-and-hold-buttons while standing on one foot outside the car" steps to change the door opening settings? The car (well, my model IV at least) has a nice big touch screen display -- how about putting some "user preference" screens in the system?
     
  7. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    because they *all* don't have a touchscreen..
     
  8. Phil Seastrand

    Phil Seastrand Junior Member

    Joined:
    Jun 13, 2009
    6
    2
    0
    Location:
    Roseville, CA
    Vehicle:
    2010 Prius
    Model:
    IV
    I just got off the phone with my local dealer (Roseville Toyota -- California) and they said it is now their policy to no longer disable the reverse beep due to liability concerns. Even when I told them the beeping only occurs INSIDE the car, it's their policy.

    *sigh*
     
  9. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    That's ridiculous. You should call Torrance and say "this dealer
    is making you guys look bad".
    .
    It sounds like there's high need to work up some sort of hack
    for this -- the beeper is driven by some piece of the car's
    electronics, perhaps the meter ECU, and gets a "reverse" signal
    from somewhere. Appropriate logic could interrupt the signal
    to the beeper at the right time. The simplest prototype would
    be a switch in series with the beeper module, sort of like the
    early NAV-enable switches ... with something fancier developed
    as people start understanding the signals. [I.e. is it a
    hardwire reverse signal, is it sent over the canbus, etc]
    .
    I'm not the right person to work on this as I don't have a genIII...
    .
    _H*
     
  10. gmalis1

    gmalis1 New Member

    Joined:
    Aug 2, 2008
    134
    14
    1
    Location:
    Northwest 'burbs, Chicago
    Vehicle:
    2010 Prius
    Model:
    IV
    I brought in my car to Bredemann Toyota for my first oil change/filter/tire rotation.

    I also told the service technician I wanted to change the "beep/beep/beep" to one beep. He agreed and informed me there would be no charge for the change. He also said the continuous beep was to alert others of me backing up, upon which I laughed hysterically and told him the beep was only INSIDE the Prius.

    After the service, when I picked up the car...of course they forgot to change the setting for the backup beep. They had to bring a "substitute" service technician over because the "main" guy was at lunch. This guy had no idea and even told me so. He said he had never done this before.

    After muddling through the myriad of menus on his portable laptop, "we" (mainly ME) found the setting and he changed it. His response..."well, I learned something today".

    BTW, my other two vehicles (my wife's Lexus RX350 and my daughter's VW New Beetle) don't beep when shifted into reverse. Why does Toyota think my Prius needs some sort of warning? Am I that stupid?
     
  11. 808_prius

    808_prius Junior Member

    Joined:
    Oct 28, 2009
    10
    0
    0
    Location:
    San Diego
    Vehicle:
    2010 Prius
    Model:
    III
    Any suggestions on a dealer to get this done at in San Diego? I tried Mossy and they wanted to charge me 50 bucks!
     
  12. Bruno_S

    Bruno_S New Member

    Joined:
    May 7, 2009
    130
    68
    0
    Location:
    San Diego, CA
    Vehicle:
    2010 Prius
    Model:
    IV
    I took mine two days ago to Mossy Toyota for the 5,000 service ($71) and it was done for free.
     
  13. Salsawonder

    Salsawonder New Member

    Joined:
    Nov 28, 2005
    1,897
    47
    0
    Location:
    La Mesa California
    Vehicle:
    2010 Prius
    Model:
    IV
    I bought mine @ El Cajon and they just did the reverse beep and three other resets for no charge while doing my first oil change.

    I use to see this guy in a Toyotoa p/u who hated Mossy so much he drove around with a sign on the back of his truck "Displeased Mossy Customer". Figured they really ticked him off!

    Toyota EC has a great new place that is green build and very comfy for waiting.
     
  14. andretti

    andretti Junior Member

    Joined:
    Dec 1, 2009
    3
    0
    0
    Location:
    Texas
    Vehicle:
    2008 Prius
    Model:
    N/A
    HOW TO DISABLE REVERSE BEEP AND SEAT BELT CHIME (WITHOUT DEALER)

    1. With your foot on the brake pedal, press the start button to turn the car on.
    2. Press the trip/odometer button until "ODO" appears on the dashboard (if it's already in that mode when you start the car, press the button three times to cycle through the "Trip" modes until you're back to "ODO" mode).
    3. Press the power button to turn the car off.
    4. With your foot on the brake pedal, press the start button to restart the car.
    5. Press and hold the trip/odometer button within six seconds of starting the car. Continue holding the ODO button for at least 10 seconds, but do NOT release the ODO button until after the next step. (This is easiest if you use the simple method of counting, "one-one-thousand, two-one-thousand, three-one-thousand," etc., up to "ten-one-thousand".)
    6. While still holding the ODO button from the step before, but after 10 seconds have elapsed, shift the car into reverse and quickly press the park button. Now release the trip/odometer button.
    7. Note that the trip/odometer display will show "b on" instead of miles.
    8. Press the trip/odometer button until the display shows "b off."
    9. Press the Power button to turn the car off.
    10. When you start the Prius back up, the reverse beep will be gone.
    11. To re-enable reverse beep, repeat the procedure. "b off" will be displayed in step 7. Toggle it to "b on" in step 8.
    12. Please note that this procedure will work ONLY on a North American model Prius, not on any other model.
    13. To disable the seat belt beep use same steps as above, but instead of shifting into reverse, fasten the driver's seat belt and then quickly press "park".
     
  15. Danny

    Danny Admin/Founder
    Staff Member

    Joined:
    Nov 24, 2003
    7,094
    2,116
    1,174
    Location:
    Charlotte, NC
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    That does not work on the 2010, only the 2004-2009.
     
  16. andretti

    andretti Junior Member

    Joined:
    Dec 1, 2009
    3
    0
    0
    Location:
    Texas
    Vehicle:
    2008 Prius
    Model:
    N/A
    You are correct this is the procedure for the 2004 -2009. The 2010 has changed but perhaps someone with a 2010 can enlighten us as to how it is done on the 2010
     
  17. LRKingII

    LRKingII New Member

    Joined:
    May 31, 2009
    679
    132
    0
    Location:
    Idaho
    Vehicle:
    2010 Prius
    Model:
    III
    It's done be a dealer only in a 2010.
     
  18. Gman777

    Gman777 New Member

    Joined:
    Nov 21, 2009
    5
    0
    0
    Location:
    Chicago
    Vehicle:
    2010 Prius
    Model:
    III
    I bought a 2010 last week. I told them I was refusing delivery of the vehicle unless they disabled the backup beep and the seatbelt beep. Page 587 and 592 are what I quoted them. I heard the usual drivel about their lawyers etc and told them they could sell a socialist car to a stinking socialist but not to me. Within 10 mins the backup beep was changed to a single beep and the seatbelt beep was turned off.

    If you are purchasing a Prius refuse delivery and they will jump to attention. Nothing like salesman's greed to trump socialist ideals!!
     
  19. tremm298

    tremm298 Junior Member

    Joined:
    Jul 30, 2009
    8
    3
    0
    Location:
    Massachusetts
    Vehicle:
    2010 Prius
    Model:
    IV
    Thanks to this thread, we have the single beep reverse and seat beep off. In our town, we do the trash run to the dump and I need to leave the hatch open, which in turn beeps while moving. I can't find the hatch switch, which may be in the latch. The four doors have standard buttons, but not the rear hatch. Possibly it is magnetic, but has anyone found a way to switch off the rear hatch "ajar" beep?
     
  20. john burns

    john burns New Member

    Joined:
    Sep 19, 2009
    37
    6
    0
    Location:
    Jacksonville Florida
    Vehicle:
    2010 Prius
    Model:
    IV
    Beep, What Beep? I fixed it myself, didn't need the dealer

    I simply took my hearing aids out....gone instantly! :rockon: