1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Need some expert advice about the rear view mirror removal

Discussion in 'Gen 3 Prius Accessories and Modifications' started by banshee08, Sep 14, 2009.

  1. banshee08

    banshee08 Member

    Joined:
    Aug 7, 2009
    284
    72
    0
    Location:
    El Monte, CA USA
    Vehicle:
    2010 Prius
    Model:
    II
    Hi all,

    I just received my Gentex Auto Dimming with home link mirror and really want to install it myself. I was looking at the mirror mount and was wondering how the OEM mirror comes off. Does it just take brute force up or down to dismount it?


    Thanks in advance,

    Chan
     
    #1 banshee08, Sep 14, 2009
  2. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    there's a little tab under the mount, near the glass. I can't remember if it pulls or pushes. Either way, it's simple.

    Oh, then push the mirror up.

    Let em know which wires you hooked the auto-dim into.
     
    #2 mgb4tim, Sep 15, 2009
  3. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    #3 mgb4tim, Sep 15, 2009
  4. rrolff

    rrolff Prius Surgeon

    Joined:
    Aug 19, 2009
    1,610
    246
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    III
    Do you know if this mount is generic - so can I buy say a Ford Gemtek, and it will mate to the Toyota version???
     
    #4 rrolff, Sep 15, 2009
  5. royrose

    royrose Senior Member

    Joined:
    Mar 21, 2009
    1,389
    951
    4
    Location:
    Foot of Pikes Peak
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Do you mind saying where you got it and what you paid?
     
    #5 royrose, Sep 15, 2009
  6. banshee08

    banshee08 Member

    Joined:
    Aug 7, 2009
    284
    72
    0
    Location:
    El Monte, CA USA
    Vehicle:
    2010 Prius
    Model:
    II
    I purchase a good condition used one on ebay for $175.00. You can find new ones for about $279.00 with the works (compass,dimming,temperature, etc).

    I will be running the wire down to the kick panels and searching for some wires to tap into there. I don't want to tap into the top ceiling console because if I have problems later it is a pain to pull apart ceiling to fix anything. I also will need to figure out where the parking light line is anyways to install fog lights.
     
    #6 banshee08, Sep 15, 2009
  7. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    the ceiling is easy, pull two pieces down. My replacement mirror used a screw to tighten to the plate.

    In ether case, let me know which whrie you used for the autodim. I haven't connected mine yet.

    I'd guess that the Ford Gemtek mirror is the same as the Toyota mirror.
     
    #7 mgb4tim, Sep 15, 2009
  8. rrolff

    rrolff Prius Surgeon

    Joined:
    Aug 19, 2009
    1,610
    246
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    III
    Rumor has it the autodim does not work on the Prius due to the back spoiler and sensor location http://priuschat.com/forums/gen-ii-...o-dimming-rearview-mirror-not-dim-enough.html
     
    #8 rrolff, Sep 15, 2009
  9. mgb4tim

    mgb4tim Noob

    Joined:
    Jul 8, 2009
    1,153
    111
    9
    Location:
    Pittsburgh, PA
    Vehicle:
    2010 Prius
    Model:
    III
    than I won't bother...LOL. But I'd still like to try.

    I read in another post that discusses covering the front sensor to cerate a greater difference between front and rear sensors to help compensate.
     
    #9 mgb4tim, Sep 15, 2009
  10. hotbrass

    hotbrass New Member

    Joined:
    Sep 3, 2009
    312
    34
    0
    Location:
    Cowtown
    Vehicle:
    2010 Prius
    Model:
    IV
    Mine works. It is a bluish tint.

    You could put a darker tint on the back to darken all light coming in.
     
    #10 hotbrass, Sep 15, 2009
(You must log in or sign up to post here.)