IPA question

Hi guys,

I have a UK T-Spirit which is equipped with IPA. It parallel parks fine on the left hand side but when I try to use it on the right it just doesnt recognise the space - even driving pretty close to the other cars and sub 9mph. Should this feature be available on both side of the car?

My car has an issue with the front bumper, which was removed and is being replaced. So it could just be that the sensor on my right hand side is not connected properly.

Thanks.

 

If you press the button again it jumps from parallel to rear parking mode.

The problem with the bumper is because I ordered front parking sensors and they are not compatible with the IPA system. Something not realised until the 4 holes had been drilled in the bumper to fit the front kit. Apparently mine was not the only car damaged in this way. So I'm getting a new undrilled front bumper from Toyota. My guess is that the dealer's mechanics did not probably connect the right hand sensor back up properly when they re-fitted the damaged bumper. My new one is due next week hopefully.

 

What second button? I've just re-checked the manual - it doesn't mention a second button either. Strange.

 

I see - its on the screen. I'll try again tonight. Thanks.

 

Mmmm. I only get access to that option to switch sides after it has measured a space on the left hand side. When I first select IPA mode it doesnt give me an option to switch sides. The problem is I live in a side street with parking on both sides and only enough room for a single one way lane of traffic up the middle. There are more spaces on the right hand side, so this is quite annoying for me. Especially as it works pretty well on the left.

 

Yes I have. I suspect it's an issue with the sensor to be honest - I know the front bumper has been off the car and then re-fitted.

What troubles me is no reference to sides in the manual. However it does show a picture clearly showing that both sides should be trying to detect other vehicles.

Thanks for your help.