2010 Prius news from Detroit - published on Jan 13th ???

i will trust you on the translation thanks, ken!

ooh, they have an article on the is-f too. wish i could read japanese!

 

Great picture, that is my color choice for my 2010 and now its my wallpaper thanks!

I just ran the link through Babblefish and it shows a "Pre crash safety system" " ultra high frequency radar system " wow! that must be the lens that we saw in the windshield

I just figured out that Babblefish is translating Prius as Pre-Mortar

I found info on the pre-crash safety system here:
http://www.autonews24h.com/Auto-Industry/Toyota-News/2455.html

 

Here is part of the article regarding the display but it is tough to figure out the translation but its another "worldwide first"

The cockpit which actualizes high visibility operativity e.g., the worldwide first “touch tracer display” which indicates the place where the ▽ finger touches in center meter is adopted,
To 3.進 the basic efficiency which is converted

 

This car will sell very well. I'm interested to see the new combined horsepower, curb weight, passenger/cargo weight limit capacity, dimensions, fuel economy, and emissions index.

I would imagine the lights just above the fog lights are daytime running lights (DRL).

 

What's MG2 reduction gears?

 

Hi nameless...,

In the original THS/HSD Prius drive train the MG2 (torquer motor) rotor was directly coupled with the ring gear of the PSD. The motor and ring gear turned at the same speed. This requires a large heavy MG2, which is why the Prius leans a little to the left.

In later HSD systems, starting with the RX400h the ring gear was made a tube, and a secondary planetary gearset was added on the far end of the ring gear (away from the PSD planetary gear set that couples the ring gear, engine and MG1). The motor rotor communicates to that second planetary gear set. The advantage is that you can have a smaller diameter, lighter weight motor, with the same power (by spinning at a higher RPM which is possible because its smaller in diameter), and the torque gets multiplied up through the secondary planetary gear set. They seem to also be able to do away with the chain drive from the ring gear to the axle in these configurations, although I do not know if that is the case with the new Prius. This makes for a smaller overall transmission package.

 

Note from Danny:

Text removed per Toyota's request. Toyota's official press images will be available in a little over 12 hours and I am pleased to announce that you'll be able to view the 2010 Prius reveal LIVE here on PriusChat via streaming video. We all appreciate the enthusiasm that the community is showing and hope that you'll join us at 11:30am EST tomorrow morning.

Danny

 

Sorry, but something in the front is putting me off. I don't really like the front; I don't know what it is. I think near the front logo, beside it.

However, I like the tech that comes with this! And the door panels look much better than the current outgoing generation. By the looks of the black plastic under the side mirrors, I guess this is the very, very base model?

I hope the interior will be better.

 

LED headlamps are the way forward. 50,000 - 100,000 hour life so you should never have to replace a bulb.

 

I'm impressed with the appparent upgrades. Those attending the show, please sit in a driver's seat and tell us if comfort, adjustments, and quality of materials change.

 

The current outgoing Prius has black plastic underneath the side mirrors on all trims. I guess my assumption wasn't all that great.

But if it is black on all trims, then it looks kinda weird because of the position it is placed (on the sides of the door, like the Lexus IS)... it looks like as if they ran out of materials and glued that part on.

:mod:

 

looks like painted plastic, so design choice.

 

I plan to, especially to get a sense of ergonomics. Hopefully Toyota has listened to us tall folks (6'4" in my case) who complain about lack of seat height adjustment and thigh support in the current model.