1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Scan Gauge II install with pics

Discussion in 'Gen 2 Prius Accessories & Modifications' started by sandman, Aug 9, 2008.

Page 1 of 2
  1. sandman

    sandman Member

    Joined:
    Mar 3, 2008
    277
    32
    0
    Location:
    kentucky
    Vehicle:
    2008 Prius
    Got my Scan Gauge II in the mail today. I read the owners manual and then spent a couple of hours trying to figure out best place to mount it, no place seemed like the right place. So below is where I ended up mounting it I will explain all the pics best I can..It took me awhile to get up the nerve to drill the hole for the cable..
    104_2451 (Small).JPG here is a pic of sg2 hooked up and working

    104_2452 (Small).JPG another pic of the same

    104_2453 (Small).JPG here is a close up of SG2- cable is hidden

    104_2454 (Small).JPG here is close up of where I ran cable you can clearly see the hole I drilled..

    104_2455 (Small).JPG I am pointing at where I ran cable had to remove vent. Had to fish it over to drilled hole with a stiff wire.

    104_2456 (Small).JPG all put back together

    104_2457 (Small).JPG Here is drill I used..:)

    104_2459 (Small).JPG I have seen some asking where to hook SG@ up well here you go.

    I do have some questions. How much is another cable? How do you reset the MPG on SG2? There should be something to fit in the 1/2inch hole I drilled that will make it look better I have seen rubber bushings with a pre-cut slit in them any suggestions of what I could use to make it look better, but you really cant see it unless you look over SG2..Let me know what you think... I like it...
     
    #1 sandman, Aug 9, 2008
  2. sandman

    sandman Member

    Joined:
    Mar 3, 2008
    277
    32
    0
    Location:
    kentucky
    Vehicle:
    2008 Prius
    OK I found the answer to most of my questions :

    ScanGauge does sell extra cables.

    I programed some more x gauges into my SG2 and got CFE(current fuel economy) to work..

    I also found a rubber grommet that I think will work to make the hole I drilled look better will try and install it tommorrow.
     
    #2 sandman, Aug 9, 2008
  3. Rest

    Rest Active Member

    Joined:
    Aug 13, 2005
    1,210
    53
    2
    Location:
    CA
    Vehicle:
    2007 Prius
    Extra cables also don't have to be bought from ScanGauge. Many other places sell them much cheaper.
     
    #3 Rest, Aug 10, 2008
  4. sandman

    sandman Member

    Joined:
    Mar 3, 2008
    277
    32
    0
    Location:
    kentucky
    Vehicle:
    2008 Prius
    OK went to Advance Auto this morning found a rubber grommet that worked and made it look much better..I am posting some pics..You guys let me know what you think..

    104_2467 (Small).JPG Here is rubber grommet I got at Advance.

    104_2463 (Small).JPG Here is a pic of it installed

    104_2468 (Small).JPG Pic from up above

    104_2465 (Small).JPG from drivers position
     
    #4 sandman, Aug 10, 2008
  5. jhall

    jhall New Member

    Joined:
    Oct 22, 2007
    71
    0
    0
    Location:
    Orange County, CA
    Vehicle:
    2008 Prius
    that is really nice work. I have been considering where to put the scanguage if I get one. That is a nice spot and a nice install. Thanks for the post.
     
    #5 jhall, Aug 10, 2008
  6. sparkyAZ

    sparkyAZ übergeek

    Joined:
    Sep 10, 2007
    311
    6
    0
    Location:
    Mesa, AZ
    Vehicle:
    2005 Prius
    Ouch! I can't bear the thought of drilling into my dash! Right now, I have my sg sitting on the steering column, with the cable folded and tucked into the gap between the column and the dash panel. It's only temporary.

    I plan on mounting my ScanGauge above the rear-view mirror. I need to have my windshield replaced anyways, so once they have it out I hope to have enough access to the headliner and A-pillar to route a 7ft network cable through the channels.

    Once I have the cabling in place, I'm going to make my own customized version of a BlendMount so I can do 2 scangauges mounted side-by-side just above the Homelink mirror.

    http://www.mgtmotorsports.com/blendmount.html

    Custom Mount Forum - Powered by vBulletin
     
    #6 sparkyAZ, Aug 10, 2008
  7. sandman

    sandman Member

    Joined:
    Mar 3, 2008
    277
    32
    0
    Location:
    kentucky
    Vehicle:
    2008 Prius
    It was hard to make myself do it, but I think it came out nice and you cant even see it unless you get your head up passed the steering wheel and look around SG2. I did not like having the cord strung over the dash..I would caution anyone that attempts this when you are drilling only use a cordless drill with a wood bit and go real, real slow with the rpm's of drill as soon as its through stop.
     
    #7 sandman, Aug 10, 2008
  8. NaptownPrius

    NaptownPrius Getting Greener....

    Joined:
    Feb 21, 2008
    271
    7
    0
    Location:
    Napolis, Merlin
    Vehicle:
    2012 Prius
    Model:
    Three
    They do tend to be temperature sensitive if left on the dash in the sun. I use a dash sunscreen and still the SGII can become blacked out for a while until it cools down.
     
    #8 NaptownPrius, Aug 10, 2008
  9. sparkyAZ

    sparkyAZ übergeek

    Joined:
    Sep 10, 2007
    311
    6
    0
    Location:
    Mesa, AZ
    Vehicle:
    2005 Prius
    Actually, I would use a step drill for this - it's much better for drilling plastic without tearing out and it automatically deburrs as you step through the diameters. You can get them at any big hardware store - Greenlee and Unibit are a couple that come to mind.

    I keep a fleece cover over mine when parked, even with the sunshade in the window. The LCD still gets darker with the heat but it quickly reverts to normal once the A/C cools the cabin down.
     
    #9 sparkyAZ, Aug 11, 2008
  10. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    nice installation!
     
    #10 Flying White Dutchman, Aug 11, 2008
  11. 9G-man

    9G-man Senior Member

    Joined:
    Jul 2, 2005
    1,273
    194
    0
    Location:
    Atlanta, GA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Nice work, the rubber grommet made all the difference!
     
    #11 9G-man, Aug 11, 2008
  12. jps000

    jps000 No Exit

    Joined:
    Aug 6, 2008
    109
    6
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    I love it; drilling your car. Does look good. Mine is installed to the left of the steering wheel. The cable runs down driver side door jam (tucks in nicely and holds) and then under the floor mat to the OBD.
     
    #12 jps000, Aug 11, 2008
  13. sandman

    sandman Member

    Joined:
    Mar 3, 2008
    277
    32
    0
    Location:
    kentucky
    Vehicle:
    2008 Prius
    That would have been my second choice, but wanted it in the same line of sight as my MFD and Dash and wanted to be able to get to the buttons easy..


    I have never used one of these but the wood bit I have in Pic that I used worked real well it went though it like butter..It also has the point so real easy to drill where you want to drill..
     
    #13 sandman, Aug 11, 2008
  14. ivanbg

    ivanbg Junior Member

    Joined:
    Jun 18, 2008
    54
    17
    0
    Location:
    Alexandria VA
    Vehicle:
    2006 Prius
    When you leave the car in a parking lot do you take the scangauge with you, or leave it out in the open.

    The reason why I ask is because a few years back my friend's car got broken into for his CD player.
     
    #14 ivanbg, Aug 29, 2008
  15. jps000

    jps000 No Exit

    Joined:
    Aug 6, 2008
    109
    6
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    I leave it there. I worry about it sometimes. But still leave it there.
     
    #15 jps000, Aug 30, 2008
  16. sandman

    sandman Member

    Joined:
    Mar 3, 2008
    277
    32
    0
    Location:
    kentucky
    Vehicle:
    2008 Prius
    My windows are tinted fairly dark, but if its real hot I do put it in center console I never take it with me. I do always lock my doors if I had to leave it in a public place for a long time I guess I would take it with me..
     
    #16 sandman, Aug 31, 2008
  17. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    I ran the cable up the left side of the steering column and tied the excess off using a twist tie through the hole in the bottom of the dash.

    I have the Garmin GPS unit on a bean bag mount with the Scangauge tucked in between the unit & the beanbag. It sits on the dash slightly to my left, in line with the inspection sticker. When not in use the entire assembly lives in a Staples box on the deck.
     
    #17 JimN, Aug 31, 2008
    hybridbear likes this.
  18. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    Thanks again to the help I get on PriusChat!
    I installed my ScanGauge II today. I drilled a 1/2 inch hole in the left rear corner of the CD storage box. I easily threaded the small end of the cable into the cavity. Once plugged in, the ScanGauge is a great press-fit into the front of the opening - holding it in place. the cable sits behind it and is hidden from view. The door is fully functional and hides the unit when the car is locked.
    Drilling into "Sipper" was a tough decision, but at least it was in an inconspicuous spot.
     
    #18 krmcg, Aug 31, 2008
  19. maseace

    maseace Prius enthusiast

    Joined:
    Jul 12, 2008
    191
    11
    0
    Location:
    Poulsbo, WA
    Vehicle:
    2004 Prius
    Sandman, what are the codes to get the Scangauge to show if EV mode is on/off? I see your "OFF EV" gauge and I would like to do that too, with my Coastal EV mod.

    Thanks!
     
    #19 maseace, Sep 21, 2008
  20. diamondlarry

    diamondlarry EPA MPG #'s killer

    Joined:
    May 20, 2007
    559
    12
    0
    Location:
    Elkhart, IN
    Vehicle:
    2007 Prius
    I would be interested in those codes too. There have been several times that I've forgotten to turn EV off and lost a bar or too in the process.:(
     
    #20 diamondlarry, Sep 21, 2008
(You must log in or sign up to post here.)
Page 1 of 2