x-gauge settings for ...

Mark,

The charge current for the HV battery is the Regen Current when the ICE is not running.

Here is something to try for the HV battery temp. from:
The SGII Xgauge Database - CleanMPG Forums

GAUGE: BATTERY TEMP (UPPER READ)
CONF?: YES, BUT FAILS OF "UPGRADED" SCANGAUGES (3.15*)
UNITS: DEG C
->TXD: 03 C3
->RXF: 01 03 02 CB 00 00
->RXD: 30 08
->MTH: 00 01 00 01 00 00
->NAM: buc
NOTES: (PRIUS) °C MAX FOR THE 5 MS CYCLE


GAUGE: BATTERY TEMP (LOWER READ)
CONF?: YES, BUT FAILS OF "UPGRADED" SCANGAUGES (3.15*)
UNITS: DEG C
->TXD: 03 C3
->RXF: 01 03 02 CB 00 00
->RXD: 38 08
->MTH: 00 01 00 01 00 00
->NAM: blc
NOTES: (PRIUS) °C MIN FOR THE 5 MS CYCLE

JeffD

 

conflicts

Some of the custom Xgauge settings can't be active simultaneously.

I ran into one yesterday I don't recall having been posted.

The codes I'm using for traction battery state of charge (SOC) conflict with the codes for traction battery temperature (blf, buf, or buc). Can't view both at the same time.

Presumably this is the same issue previously reported in which display of some codings for other traction battery parameters conflict with each other.

I think some people have reported the battery temperature codes not to work for them--these people may have had a conflicting parameter enabled for display.

One other point: the Fahrenheit temperatures display nn.n when the temperature is below 100F. This lets you see that they change in integer multiples of 1.8--obviously the actual value on the bus is a Celsius integer value.

 

I have my Sangauge II mounted in my Gen 3 -- but none of the Xgauges seem to work. They just read blank. I've tried both the passive and active ones for SoC, Battery Current, and Battery Voltage. Anyone know what I might be doing wrong?

 

It was my understanding several codes available on gen II cars have not yet been decoded and programmed for the gen III cars.

 

I did some more digging last night and that appears to be the case. I have the latest excel sheet with all the codes -- I will give them a try and mark them down as to which work and which don't.

SoC, Battery Amps and Battery Volts (both passive and active) all don't work.

But I put in mph (xx.xx) and that one seems to work. I haven't driven the car yet but at least it shows a 0.00 on the screen when stopped....

 

I tried some more Xgauges today and none worked. So far only the mph xx.xx works... (and of course kph since it's just different math.)

It is fun to watch it updated so incredibly fast since it's passive.... but I would love to have more gauges available.