How do you stop pass/ seat belt beeping

1- Turn car on, cycle odo to read odo and not trip a or b
2- Turn car off
3- Turn car on, within 6 seconds press odo and HOLD it for at least 10 seconds
4- While still holding odo latch seatbelt
5- While still holding odo unlatch seatbelt, odo will change to b-on
6- Press odo once, b-on will become b-off
7- Turn car off

These instructions work for the driver's side seatbelt and the reverse beep (just replace seatbelt latch/unlatch with shift into reverse, then park) but I have to admit that I haven't tried it for the passenger side seatbelt. It should work, but you may have to have someone sit in the passenger's seat while latching/unlatching. I am pretty sure that is the case.

 

wait to stop before unbluckling

 

I hear you, but if it's anything like where I live, the mailbox is about 4 houses down from ours. We stop on the way home to check the mail and when my wife gets back in, no need to refasten the seatbelt. Starts squawking before we get home.

Funny that I haven't quieted it yet.