1. Attachments are working again! Check out this thread for more details and to report any other bugs.

More throttle ifo

Discussion in 'Gen 2 Prius Technical Discussion' started by hobbit, May 29, 2008.

  1. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    More throttle info

    A sudden inspiration this afternoon, stemming somewhat from a
    discussion over on cleanmpg, led to an add-on page to the
    throttle body stuff. This shows where the throttle flap sits
    at various percentages of position as reported by the computer.
    Enjoy. It was a fun little photographic project, for the most part..
    .
    _H*
     
    #1 hobbit, May 29, 2008
  2. tochatihu

    tochatihu Senior Member

    Joined:
    Apr 10, 2004
    9,159
    3,565
    0
    Location:
    Kunming Yunnan China
    Vehicle:
    2001 Prius
    Very nice, but Patrick's butterfly is cleaner than yours :)
     
    #2 tochatihu, May 29, 2008
  3. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,666
    15,664
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    <cough cough> It is bad enough when folks get into 'mileage pissing' contest. <GRINS>

    Bob Wilson
     
    #3 bwilson4web, May 29, 2008
  4. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    Hmmph. I cleaned it pretty thoroughly maybe TWO YEARS ago, and
    relative to how most cars would be by now, it's pretty pristine.
    I also dropped a teeny bit of lube on the shaft pivots while
    I was in there yesterday. Didn't want to keep the airbox off
    too long, because it's still pollen season up here in a big way..
    .
    _H*
     
    #4 hobbit, May 29, 2008
  5. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Re: More throttle info

    Hi Hobbit,

    Fascinating...

    I assume that the car was IG-ON (not READY) when these readings were taken?

    What instrumentation do you use to determine the throttle opening %s?

    Hi Doug,

    Glad that someone noticed my throttle body avatar; that photo is of the 2001. I'm rotating various Prius photos through the avatar on a monthly cycle.
     
    #5 Patrick Wong, May 29, 2008
  6. Ichiro

    Ichiro Member

    Joined:
    Apr 25, 2008
    335
    13
    0
    Location:
    SF
    Vehicle:
    2008 Prius
    Cool animated gif!
     
    #6 Ichiro, May 29, 2008
  7. dogfriend

    dogfriend Human - Animal Hybrid

    Joined:
    Feb 26, 2007
    7,512
    1,188
    0
    Location:
    Carmichael, CA
    Vehicle:
    2007 Prius
    Its pretty damn clean. You obviously have never owned a Ford. ;)
     
    #7 dogfriend, May 29, 2008
  8. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    Yup, it was IG-ON so the throttle motor wasn't trying to fight
    me, and I just eyeballed the autoenginuity reading until it was
    stable before snapping the pic. The car still threw a code
    afterward, of course, because I had the MAF/IAT connector off
    while the ECU was powered up, but not biggie as it just reset
    later.
    .
    _H*
     
    #8 hobbit, Jun 1, 2008
  9. racerbob

    racerbob Member

    Joined:
    Mar 16, 2008
    138
    6
    0
    Location:
    S Florida
    Vehicle:
    2008 Prius
    Watch your fingers! That motor is powerful. I've seen one eat a screwdriver and bend the throttle plate. Students!!! :rockon:
     
    #9 racerbob, Jun 2, 2008
  10. tochatihu

    tochatihu Senior Member

    Joined:
    Apr 10, 2004
    9,159
    3,565
    0
    Location:
    Kunming Yunnan China
    Vehicle:
    2001 Prius
    Anyway, I liked the animation also. But to really clean the butterfly, one should unmount the throttle body. It is the only use for 5/16" bolts wrapped with electrical tape. To plug the koolaid tubes, of course.
     
    #10 tochatihu, Jun 3, 2008
(You must log in or sign up to post here.)