1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Knocking zone coming from steering over bumps

Discussion in 'Gen 3 Prius Technical Discussion' started by douglasjre, Oct 4, 2024.

  1. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,992
    676
    0
    Location:
    Null, NL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Rumor has it that there's a plastic star gear at the bottom of the steering column, but the parts diagram doesn't show that part. I already replaced all the tie rods and lower control arms but that sound is still there over bumps and can be reproduced when jiggling the wheel back and forth. Any opinions?
     
    #1 douglasjre, Oct 4, 2024
  2. Pete44

    Pete44 Junior Member

    Joined:
    Jul 2, 2018
    43
    11
    0
    Location:
    Texas
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Those look really good. I have a torn rubber boot on my upper sway bar link on one side. Don't know how bad this will prove to be on the joint, but will replace someday if it starts having a problem.

    The springs do "look" better on the new struts, but I wonder, since springs can look identical and have very different spring-rates, if they're just more coils of metal to get a similar spring rate to OEM's. The couple of pounds isn't much of a difference, which is good, and those look great....just wonder how the springs will hold up compared to OEM. They might be better.
     
    #2 Pete44, Oct 6, 2024
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,419
    3,409
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Wheel bearing, or tie rod end, inside and/or outside.
     
    #3 ASRDogman, Oct 6, 2024
  4. Eddie25

    Eddie25 Active Member

    Joined:
    Dec 31, 2018
    434
    174
    0
    Location:
    IL
    Vehicle:
    2011 Prius
    Model:
    III
    #4 Eddie25, Oct 8, 2024
  5. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,992
    676
    0
    Location:
    Null, NL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    #5 douglasjre, Oct 9, 2024
  6. Eddie25

    Eddie25 Active Member

    Joined:
    Dec 31, 2018
    434
    174
    0
    Location:
    IL
    Vehicle:
    2011 Prius
    Model:
    III
    I thought it did, but I'm not sure. My issue was the bolt.
     
    #6 Eddie25, Oct 9, 2024
(You must log in or sign up to post here.)