1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Badges

Discussion in 'Prius v Accessories and Modifications' started by BlueV15, Oct 4, 2024.

  1. BlueV15

    BlueV15 Junior Member

    Joined:
    Nov 6, 2023
    23
    9
    0
    Location:
    Southern California
    Vehicle:
    2015 Prius v wagon
    Model:
    Two
    I was thinking of either doing some debadging or painting badges. I've read that some badges have holes behind them and others have said those same badges don't have holes on their cars. Is there a definitive list of which badges have holes and which don't?
     
    #1 BlueV15, Oct 4, 2024
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,376
    1,792
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    When you pull them off if they have holes they can go right back into the holes if you're not going to do badge because of the tiny three or four holes then you can just clean up the Toyota logo maybe paint it clear blue or whatever it is you want to do and then you can put it right back into the original holes with something like goop just a little dab will do you. And then you're good there The one on the hood the one on the steering wheel have little holes I've taken them off I'm not sure about the ones on the trunk I think I took one off of the hatch release thing but I have to make sure that
     
    #2 Tombukt2, Oct 4, 2024
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,376
    1,792
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Yes the one on the hatch release band three holes in it but it's plastic so you can easily fill those and spray over them should you desire or paint the logo blue like the one on the generation 3 and just reinstall it
     
    #3 Tombukt2, Oct 4, 2024
  4. BlueV15

    BlueV15 Junior Member

    Joined:
    Nov 6, 2023
    23
    9
    0
    Location:
    Southern California
    Vehicle:
    2015 Prius v wagon
    Model:
    Two
    If it helps anyone: on my '15, the two hybrid badges on the front quarter panels both have holes, but only the drivers side badge has pegs, the passenger side is flat. They are both pretty fragile, especially when heated to get the adhesive off. The Prius V and big l hybrid synergy drive on the back have no holes, so they can be removed with heat. The Prius V badge is a bit fragile, as well, so he careful with it. I decided to leave the back debadged and I'm painting the side hybrid badges black. I removed the blue strips before paint so I can reapply them afterwards to keep the blue.

    For the front and rear Toyota badges, they came off quite easily by sliding a thin flathead screwdriver from the sides and carefully popping them off. I'm painting them black and keeping the blue background.
     
    #4 BlueV15, Oct 5, 2024
  5. Centerpunch

    Centerpunch Active Member

    Joined:
    Sep 29, 2019
    148
    137
    1
    Location:
    OH / NC
    Vehicle:
    2017 Prius v wagon
    Model:
    Four
    #5 Centerpunch, Oct 8, 2024
  6. Ford Galaxie

    Ford Galaxie Junior Member

    Joined:
    Aug 19, 2018
    38
    22
    1
    Location:
    Rome, GA
    Vehicle:
    2014 Prius v wagon
    Model:
    V
    The badges on the Prius V hatch lid are held on with some adhesive tape. I removed them with some fishing line,masking tape and a heat gun. The hatch lid is not drilled for emblems. I left the Toyota emblem.
     
    #6 Ford Galaxie, Oct 19, 2024
(You must log in or sign up to post here.)