P0A08 error code

That's strange. This is what I see when I click on info for the app 1.62 at the bottom.

So I tried again with the previous post on #53 but still same thing.

So I un-installed and went to my files and installed the apk from #53 and was able to get somewhere it finally allowed me to do a Full Scan and get the p0aa6 code.

Then when I went to the "ev battery section" it says it's not supported? 3rd screenshot

So then I went to the "mail" tab where all the makes are found. I select toyota and when I put in my vin it just tells me what it includes but nothing to download (4th screenshot)

I imagine I need to download a different build? I downloaded build 8 iirc

 

The Autel MaxiAP200 app is NOT the correct app to use with the Autel AP2500 OBD2 red doggle that you purchased. That app is used for the Autel AP200 OBD2 white doggle. You now have the correct app (build 8) installed on your phone. The full scan will not complete unless the Toyota file was downloaded to your phone, so you are all good.

The "ev battery section" does not work for a Prius because it is a hybrid vehicle. A Prius is not an ev (electric vehicle), so it does not have an ev battery.

Now that the Autel AP2500 is working for you, we should continue the discussion about the P0AA6 code in the thread that you created for your car: https://priuschat.com/index.php?posts/3476671

 

The INF codes for a P0AA6 code will be in the P0AA6 code's freeze frame. You should find that under Diagnostics where you scanned and saw the P0AA6 code in the first place.

 

Now that the Autel AP2500 is working for you, we should continue the discussion about the P0AA6 code in the thread that you created for your car: https://priuschat.com/index.php?posts/3476671