1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Inverter pump went off, replaced it replaced am2 fuse and now car wont go in drive

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Amnel Caban-Ortiz, Sep 4, 2024.

  1. Amnel Caban-Ortiz

    Amnel Caban-Ortiz New Member

    Joined:
    Sep 4, 2024
    3
    0
    0
    Location:
    SC
    Vehicle:
    2008 Prius
    Model:
    N/A
    The car let me on the side of the road with a blown fuse am2. Replaced the coolant pump and am2 fuse and now car wont go on drive. Ready light never goes on, the fuse isnt blowing and the pump its working.
     
    #1 Amnel Caban-Ortiz, Sep 4, 2024
  2. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,106
    410
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    Probably a different fuse has blown. You need to check all the fuses in the car.
     
    #2 Brian1954, Sep 4, 2024
  3. Amnel Caban-Ortiz

    Amnel Caban-Ortiz New Member

    Joined:
    Sep 4, 2024
    3
    0
    0
    Location:
    SC
    Vehicle:
    2008 Prius
    Model:
    N/A
    I did check all of them and nothing. It has the big red triangle and only goes to neutral
     
    #3 Amnel Caban-Ortiz, Sep 4, 2024
  4. MAX2

    MAX2 Member

    Joined:
    Aug 12, 2024
    371
    88
    10
    Location:
    Third Rock from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
    Let's do magic together.
    Turn off the car.
    Remove the negative terminal from the 12V battery.
    Read the prayer slowly.
    Connect the negative terminal to the 12V battery.
    Turn the car back on.
     
    #4 MAX2, Sep 5, 2024
  5. Amnel Caban-Ortiz

    Amnel Caban-Ortiz New Member

    Joined:
    Sep 4, 2024
    3
    0
    0
    Location:
    SC
    Vehicle:
    2008 Prius
    Model:
    N/A
    The magic didnt work
     
    #5 Amnel Caban-Ortiz, Sep 5, 2024
  6. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,106
    410
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    The red triangle light on the dash means you have trouble codes that need to be read with an OBD2 scan tool. If you are interested in purchasing a scan tool, read this thread: https://priuschat.com/index.php?posts/3290690
     
    #6 Brian1954, Sep 5, 2024
(You must log in or sign up to post here.)