1. Attachments are working again! Check out this thread for more details and to report any other bugs.

I can't get my car to run. Please help!

Discussion in 'Gen 2 Prius Main Forum' started by Prius92, Aug 6, 2024.

Page 2 of 2
  1. Prius92

    Prius92 Active Member

    Joined:
    Sep 14, 2019
    447
    106
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    II
    Are there any bluetooth apps that show INF/Subcodes, or do I need techstream?
     
    #21 Prius92, Aug 7, 2024
  2. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,062
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    You're super focused on this being a throttle body issue. I can tell you right now, I can walk out to my 2007, unplug the throttle body from the car harness, start the car and drive away. I've done it. I once even forgot to plug in the TB wire on a customer's car after a bunch of pro-bono repairs I did as a Christmas gift. Called them the next day when I realized it and they had already driven the car a couple times. They mentioned it had driven a bit oddly, but it did drive. Drove much better after they plugged it in....:(
     
    #22 TMR-JWAP, Aug 7, 2024
    Tombukt2 likes this.
  3. Prius92

    Prius92 Active Member

    Joined:
    Sep 14, 2019
    447
    106
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    II
    I took another look at the connectors once the sun came up. I poke around in the dark last night and didn't notice this.
    [​IMG]
    This connector has a corner broken off, but none of the pins are loose or whatnot.
    This is the same connector for the throttle body wires.
    Also, it's weird a lot of the sensors ground through the ECM. I'm not sure where the ECM ground itself is.

    I'm going to get some map pins, wire leads and my fluke meter out to make sure there is continuity between all 4 pins of the throttle body connector and the connector at the ECM.
     
    #23 Prius92, Aug 7, 2024
  4. Prius92

    Prius92 Active Member

    Joined:
    Sep 14, 2019
    447
    106
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    II
    I probed the throttle body connector and the ECM connector, all 4 wires have perfect continuity.
    I cut the plastic that was broken off, off.
    I reset the connector, and found by gently tugging on it, the missing plastic does not affect the tightness of the connector in the socket.
    Currently charging the 12v battery.
     
    #24 Prius92, Aug 7, 2024
  5. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Yeah... There's a bunch of brake system error codes that I've only been able to read and clear via jumping the pins. Does that work the same way with Gen3?
     
    #25 PriusCamper, Aug 7, 2024
  6. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    That definitely explains why your codes were a bit different than just a simple single throttle body position sensor code. I wonder how that happened?

    In general, if you get alot of codes all at one it most often ends up being related to a plug not plugged in correctly.
     
    #26 PriusCamper, Aug 7, 2024
  7. Prius92

    Prius92 Active Member

    Joined:
    Sep 14, 2019
    447
    106
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    II
    PC, go here:
    Leaking oil pressure sender. | PriusChat

    My question is, if the engine isn't coming to pressure due to this leak, would it just shut the engine down after 5-10 seconds?

    IIRC, there is no DTC's for low oil pressure, other than the red triangle.
     
    #27 Prius92, Aug 7, 2024
  8. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,369
    1,791
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    In generation 2 I don't think so same when you run out of gas other than the light on the fuel gauge flashing it works the triangle comes on because the engine stops abruptly like something's wrong
     
    #28 Tombukt2, Aug 7, 2024
  9. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    I suspect @ChapmanF could answer that... My sense is if there was something as serious as that the hybrid battery wouldn't spin the motor in the first place.
     
    #29 PriusCamper, Aug 7, 2024
  10. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,062
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    Don't overlook post #20, item 2.
     
    #30 TMR-JWAP, Aug 7, 2024
    PriusCamper likes this.
  11. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    #31 PriusCamper, Aug 7, 2024
(You must log in or sign up to post here.)
Page 2 of 2