1. Attachments are working again! Check out this thread for more details and to report any other bugs.

airbag light

Discussion in 'Generation 1 Prius Discussion' started by ronlewis, Apr 17, 2024.

  1. ronlewis

    ronlewis Active Member

    Joined:
    Dec 5, 2016
    938
    188
    1
    Location:
    texas
    Vehicle:
    2001 Prius
    Model:
    One
    Nothing is ever easy. I got my green car back together after a front end wreck. The bags didn't deploy, but the dash light is flashing. I've jumped the OBDII pins to read the DTCs and nothing changes - the light continues flashing the same way - about 1 second on, one off. I jumped the pins to clear any DTCs and nothing changed.

    The manual keeps telling me to swap the srs ecu, that's its solution for almost everything, but it just doesn't feel right. I think the wreck did something to one of the sensors. what a pain.

    I got another one with a solid light, but I did swap the bags on it. Hopefully, I can clear the codes on that one.
     
    #1 ronlewis, Apr 17, 2024
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,902
    16,209
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    That's an unusual pattern—it isn't any DTC, and it also isn't the "got no DTCs" pattern. I'm thinking the manual should mention such a pattern specifically. What does it have to say about it?
     
    #2 ChapmanF, Apr 17, 2024
  3. ronlewis

    ronlewis Active Member

    Joined:
    Dec 5, 2016
    938
    188
    1
    Location:
    texas
    Vehicle:
    2001 Prius
    Model:
    One
    I didn't see anything. It says the normal pattern is .25 seconds on, .25 seconds off. Or, if it was part of a DTC pattern, there would be a 4 second pause at the end of the codes before repeating, and it doesn't do that either. Just 1 sec on, 1 sec off.

    I'm going to swap the SRS ecm, just haven't gotten around to it yet.
     
    #3 ronlewis, Apr 18, 2024
(You must log in or sign up to post here.)