1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Dashcam wire A pillar , 2007 Prius Base

Discussion in 'Gen 2 Prius Accessories & Modifications' started by ccna101, Apr 16, 2024.

  1. ccna101

    ccna101 Member

    Joined:
    Aug 6, 2019
    94
    27
    0
    Location:
    SFO/IAD/DCA
    Vehicle:
    2020 Prius Prime
    Model:
    Plug-in Base
    So I search, there seem to be multiple thread out there but since it is very important, I hope I can get your SME give me the insight :

    1. Disconnect the 12V negative and wait for 30 min. ( airbag )
    2. To run the Viofo dashcam (12V) from windshield, slide wire between windshield and headliner with credit card, correct ?
    3. Any detail how to unmount the side plastic cover ? I do know it is tricky ( all Utuber skip over this ).
    4. Once it reach the side where the SRD logo is, pop the weather strip and thread the cable -BEHIND- the curtain airbag... try to stay along the existing wire and we are safe ???
    5. it is standard dashcam so I can extend ( tap into ACC fuse ) ....

    Let me know if I miss anything ?! last thing I want is cause issue with airbag/safety thing.
     
    #1 ccna101, Apr 16, 2024
  2. Leadfoot J. McCoalroller

    Leadfoot J. McCoalroller Senior Member

    Joined:
    May 12, 2018
    7,427
    6,913
    1
    Location:
    Pennsylvania
    Vehicle:
    2018 Prius c
    Model:
    Two
    Use both hands. (That's also why they can't film it.)
     
    #2 Leadfoot J. McCoalroller, Apr 16, 2024
    ccna101 likes this.
  3. Aloe

    Aloe Junior Member

    Joined:
    Jan 21, 2024
    57
    5
    0
    Location:
    Canada South
    Vehicle:
    2006 Prius
    Model:
    N/A
    3) Pull off the black rubber door frame surround (just along the pillar). Now you have access to pull on the plastic pillar trim.
     
    #3 Aloe, Apr 16, 2024
(You must log in or sign up to post here.)